System Requirements - Panasonic KX-NCP Series Quick Reference Manual

3 System Requirements

The tables below summarise the requirements for running CA Client.
PC
When CA Client is connected to your PBX directly, the number of contacts that can be displayed in the contact
list depends on your computer's specifications. When CA Server is used, the number of contacts, including
contacts of other networked PBXs, is not limited by your PC's specifications.
1.0 GHz Intel Pentium
®
comparable CPU
2.0 GHz Intel Pentium/Celeron processor or
comparable CPU
2.6 GHz Intel Pentium/Celeron processor or
comparable CPU
2.6 GHz Intel Core™2 Duo processor or
comparable CPU
Note
•
The above specifications are approximations and may vary according to your computer's status,
network conditions, other programs running, etc.
Supported Operating Systems:
•
Microsoft Windows
•
Windows Vista
•
Windows 7 Professional (32-bit/64-bit)
64-bit versions of Windows XP are not supported.
*1
Other specifications are as follows:
Hard Disk
Video Resolution
Interface
For thin client environments, the following two platforms are supported:
•
Microsoft Terminal Service on Windows Server
2008
•
Citrix XenApp on Windows Server 2003 with Service Pack 1 or later (Client computer must fulfill the system
requirements for Citrix XenApp)
32 Quick Reference Guide
CPU
/Celeron processor or
® ®
XP Professional Service Pack 3 or later (32-bit
®
Business (32-bit/64-bit)
®
Minimum
1.5 GB available space
1024 ´ 768
10/100Base-T
Number of Contacts in Contact List
Memory
Direct PBX
Connection
512 MB 32
1 GB 128
1 GB 256
1 GB 1000
)
*1
2.0 GB available space
1280 ´ 1024
100Base-T
2003 with Service Pack 1 or later and Windows Server
®
CA Server
Connection
1000
1000
1000
1000
Recommended