Anticorrosion Treatment - Sea-doo LRV 5688 Operator's Manual

Apply anti-seize lubricant on spark plug
threads then reinstall them.
Properly reconnect spark plug cables
to spark plugs.
Wipe up any residual water from the
engine.
NOTE: Repeat the same procedure
for the other engine (if applicable).
1
F07H07Y
TYPICAL
1. Grounding device

Anticorrosion Treatment

To prevent corrosion, spray a corrosion
inhibitor (salt water resistant) such as
BOMBARDIER LUBE lubricant or
equivalent over metallic components
in engine compartment.
Apply dielectric grease (salt water re-
sistant) on battery posts and cable
connectors.
CAUTION: Never leave rags or tools
in the engine compartment or in the
bilge.
43
www.SeaDooManuals.net