Download Print this page

Anticorrosion Treatment - Sea-doo 4-TEC series 2008 Shop Manual

4-tec series 2008

Advertisement

CAUTION: Never clean fiberglass and plastic
parts with strong detergent, degreasing
agent, paint thinner, acetone, etc.
If the watercraft is to be stored outside,
cover it with an opaque tarpaulin to prevent
sun rays and grime from affecting the plastic
components, watercraft finish as well as
preventing dust accumulation.
CAUTION: The watercraft must never be
Ieft in water for storage. Never leave the
watercraft stored in direct sunlight.
ANTICORROSION
TREATMENT
Wipe off any residual water in the engine
compartment.
Spray BOMBARDIER LUBE lubricant over all
metallic components in engine compartment.
Lubricate the throttle cable with
BOMBARDIER LUBE lubricant.
Apply an anticorrosion product (P/N 219 700 304)
on drive shaft. Refer to PROPULSION is
appropriate SHOP MANUAL.
NOTE: The seat should be partially left
opened during storage. This will avoid engine
compartment condensation and possible corrosion.
CHECK LIST
OPERATION
Propulsion System
Fuel System
Engine Oil and Filter Change
Exhaust Cooling System Flushing
Close Loop Cooling System (engine)
Engine Lubrication
Throttle Body Lubrication
Intercooler and Exhaust Manifold
Antifreeze Protection
Battery
Watercraft Cleaning

Anticorrosion Treatment

4 / 4
2006-15
www.SeaDooManuals.net
Service

Advertisement

loading