Adjusting The Sound Volume; Adlc (Automatic Digital Level Controller); Digital Signal Processor Function (Pd-Dm902 Only) - Pioneer PD-DM802 Operating Instructions Manual

Multi-play compact disc player
Hide thumbs Also See for PD-DM802:
Table of Contents

Advertisement

VARIOUS OPERATIONS
| Adjusting the sound volume
a
OUTPUT LeveL
ss
a
]
]
be
a)
Press OUTPUT LEVEL "—" or "+" to adjust the output jevel. The
output level can be adjusted between 0 dB and —25 dB in steps of
1 dB.
@
The ATT display shows the selected level.
@
The output level at the OUTPUT jacks and PHONES jack will be
adjusted simultaneously.
@
The setting of OUTPUT
LEVEL is not erased even when the
power is turned off.
ADLC (Automatic Digital Level Controller)
When the difference of recording level between discs is noticeable,
the volume level should be adjusted for each disc, especially during
program playback or random playback whose tracks are' selected
between 2 discs or more. Insuch cases, pressing ADLC automatically
sets the output level to the proper level. When ADLC is turned on,
the ADLC indicator lights.
® Toturnoff ADLC, press ADLC so that the ADLC indicator goes off.
®@ With some selections, sound becomes unnatural. In such cases,
turn off ADLC.
NOTES:
@
The setting of OUTPUT LEVEL "-" or "+" (remote control unit) is
canceled when ADLC is turned on. When ADLC is turned off, the
output level returns to the setting of OUTPUT LEVEL "-" or "+"
(remote control unit).
@
When ADLC is turned on, OUTPUT LEVEL
"~" or "+" (remote
control unit) cannot be operated.
16
<PRB1189>
En
DIGITAL SIGNAL PROCESSOR function
(PD-DMS02 only)
PD-DM802 only
—————_———_
|
PD-DM802 only
=
osP
During stop mode or playback mode.
The built-in digital signal processor provides various sound fields.
Refer to the description of each DIGITAL SIGNAL PROCESSOR and
selecta desired DIGITAL SIGNAL PROCESSOR with DIGITAL SIGNAL
PROCESSOR on the front panel or DIGITAL SIGNAL PROCESSOR
on the remote control unit. Each time DIGITAL SIGNAL PROCESSOR
onthe remote control unit is pressed, DIGITAL SIGNAL PROCESSOR
changes in the following order.
mee
——»
JAZZ —
CHURCH
STADIUM
<@— HALL <—
eee
The corresponding DSP MODE indicator blinks for about 5 seconds
and then lights up.
FLAT:
No effect
JAZZ:
"Reproduces a "live house" atmosphere. Effective for
playing jazz music with boosted middle frequencies.
CHURCH:
Reproduces a "church made of wood" atmosphere.
Effective for playing baroque music, choral group, etc.
DANCE:
Reproduces a dynamic sound. Effective for playing
disco music, pops, rock music, etc. with boosted high
and low frequencies.
HALL:
Reproduces a "concert hall" atmosphere.
Echo and
reverberation sounds are relatively long. Effective for
playing classic orchestra music.
STADIUM:
Reproduces the acoustics
of an outdoor stadium.
Effective for playing a program source recorded on an
outdoor stage
e
In DIGITAL SIGNAL PROCESSOR, the sound may be distorted
depending on the connected amplifier. In such cases, adjust the
volume with OUTPUT LEVEL.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pd-dm902

Table of Contents