Download Print this page

Volkswagen Multivan Controls And Features Page 51

Multivan; caravelle; transporter.
Hide thumbs

Advertisement

CONTROLS
AND
EQUIPMENT
F o l d i n g s e a t *
The backrest of the single seat next to the
centre seat bench can be folded in such a
manner to enable easy access to the rear
seat bench.
Folding b a c k r e s t d o w n
Warning
For safety reasons the backrest
must a l w a y s be latched vertically
when vehicle is in motion.
Unlatch backrest and fold forwards (left-
hand illustration).
Removing seat
Please refer to the general notes on
page 93.
Set seat into sitting position.
Press both levers on base of seat down-
wards - see illustration above.
Press seat towards left hand side in
direction of seat bench and take out.
Installing seat
Please refer to the general notes on
page 93.
To install the seat, place seat on left hand
side of the securing elements on vehicle
floor.
Press the two levers on base of the seat
down and pull the seat to the right until it en-
gages firmly in the securing parts.
•I
9e
SEATS AND
STOWAGE
CONTROLS
AND EQUIf'MLN
I
R o t a t i n g s e a t *
The function of the rotating seat corre-
sponds to that of the rotating driver's and
front passenger seat (see page 75)
G r o u p 0 child seats may be fitted to
a rotating seat only when the seat is
f a c i n g in the direction of travel and
securely e n g a g e d .
For information about properly se-
c u r i n g
child
seats
and
what
to
c h e c k , see b o o k 2.1.
I
Warning
When the vehicle is m o v i n g the
rotating seats must be facing for-
ward and properly secured.
R e m o v i n g seat
Please refer to the general notes on
page 93.
Remove the covers from the four bolts.
Remove the four bolts and remove seat
(arrows in diagram indicate the two left
bolts).
Screw in and tighten all four bolts in the
securing points.
Replace the covers on the bolts.
Installing seat
Please refer to the general notes on
page 93.
Remove the covers from the four bolts.
Remove the four bolts.
Place the seat over the securing points in
such a way that all four bolts can be
screwed into the securing points.
Then tighten all four bolts.
Replace the covers on the four bolts.
Warning
A l w a y s ensure that that the ro-
tating seat
securing bolts
are
tightened fully again.
The security of the seat belts and
therefore the safety of the pass-
engers d e p e n d s upon it.
Please
have
the
t i g h t e n i n g
torque
of
the
securing
bolts
c h e c k e d by a V o l k s w a g e n dealer
after the seat has been installed.
SEATS AND
STOWAGE
97
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans

Advertisement

This manual also for:

Caravelle, Transporter

Comments to this Manuals

Symbols: 0
Latest comments: