Download Print this page

Volkswagen Multivan Controls And Features Page 58

Multivan; caravelle; transporter.
Hide thumbs

Advertisement

CONTROLS
AND
EQUIPMENT
Folding table in the
Multivan
7
| B7D-098P |
Setting up the folding table
The sleeping surface/seat bench must first
be placed in the driving position before set-
ting up the folding table. The moveable ro-
tating seat must be right at the front of the
seat runners and be engaged in the oppo-
site direction to the direction of travel. The
folding table will otherwise hit the seat
cushion and cannot be folded up.
Pull the folding table out of the retainer in
the direction of the arrow. Then swing the
table up until the support strut engages se-
curely.
When using the folding table, it must, for
reasons of safety, be engaged in the original
or convenience position.
Warning
The f olding table should not be
erected w h e n the vehicle
is in
motion as it could cause injuries
in case of an accident or sudden
braking!
For this r eason, the table must be
folded
d o w n
and
properly
se-
cured w h e n the vehicle is on the
road.
1
r
i
1
\ B7D-099P |
Folding table positions
1 - Original position
2 - Convenience position
In order to increase the comfort of the pass-
engers on the seat bench, you can push the
folding tale to the rear once it has been set
up.
Please note that the folding table can only
properly engage in the original or conveni-
ence position.
110
CONTROLS
AND
EQUIPMENT
M o v i n g f o l d i n g table
There is a disengaging lever underneath the
table (see illustration).
In order to avoid damage to the side
trim or the f o l d i n g table, the folding
table may only be moved w h e n it is
the fully upright position.
M o v i n g to the
convenience
position
Pull the disengaging lever to the rear in the
direction of the arrow and hold the lever in
this position. Push the table fully to the rear
and release the lever. The table must en-
gage properly in the convenience position.
>
M o v i n g to the original position
In order to return the table to the original
position, pull the disengaging lever to the
rear and hold the lever in this position. Push
the table right to the front and release the
lever. The table must engage properly in the
original position.
Folding d o w n the table
In order to avoid damage to the side
trim or to the folding table, the table
may only be folded back d o w n in the
original position.
The seat bench/sleeping surface must be in
the driving position before folding down the
table. The moveable rotating seat must be
right at the front of the seat runners and en-
gaged in the opposite direction to the direc-
tion of travel. The folding table will other-
wise hit the seat cushion and cannot be
folded down.
M o v e the table back to the original posi-
tion until it engages properly.
Lift the table slightly until the knob
farrow) on side of table support strut can be
pushed in.
Swing the table clown. Press on the table
lightly until it engages in the retainer.
SEATS AND STOWAGE
-
www.vwT4camper.info - a useful website for owners and enthusiasts of VW T4 Transporter Campervans

Advertisement

This manual also for:

Caravelle, Transporter

Comments to this Manuals

Symbols: 0
Latest comments: