Turning Off The Power Automatically - JVC CA-UXG45 Instructions Manual

Turning Off the Power
Remote
Automatically
ONLY
To turn off the System after playback is over—
Auto Standby
This function works only when the source is CD or tape.
A.STANDBY
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the disc and tape playback stops, the A.STBY
indicator starts flashing.
If no disc or tape operation is done for about 3 minutes while
the indicator is flashing, the System turns off (stands by)
automatically.
To turn off the System after a certain period of
time—Sleep Timer
1 Specify the time (in minutes).
SLEEP
10 20
2 Wait until the set time goes off.
To check the time remaining until the shut-off time
SLEEP
• If you press the button repeatedly, you can change the shut-
off time.
17
A.STBY
Canceled
(No indication)
30 60 90 120
OFF
(Canceled)