Additional Information; Learning More About This System - JVC CA-UXG45 Instructions Manual

Micro component system consists of ca-uxg45 and sp-uxg45
Hide thumbs Also See for CA-UXG45:
Table of Contents

Advertisement

Learning More about This System

Daily Operations—Playback
Listening to the Radio:
• If you store a new station into an occupied preset number, the
previously stored station in that number will be erased.
• When you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If this
happens, preset the stations again.
Playing Back a Disc/USB Memory/DAP:
• When using an 8 cm disc, place it on the inner circle of the disc
tray.
• This System cannot play "packet write" discs.
• For MP3 playback...
– MP3 discs are required a longer readout time than regular
CDs. (It depends on the complexity of the group/file
configuration.)
– Some MP3 files cannot be played back and will be skipped.
This result from their recording processes and conditions.
– When making MP3 discs, use ISO 9660 Level 1 or Level 2
for the disc format.
– This System can play back MP3 files with the extension
code <.mp3> (regardless of the letter case—upper/lower).
– Some characters or symbols will not be shown correctly on
the display.
The maximum character number shown on the display is 32
(without the extension code) for files, and 30 for ID3 tag.
– It is recommended that you make each MP3 file at a
sampling rate of 44.1 kHz and at bit rate of 128 kbps.
– This System can recognize a total of 500 tracks and 200
groups on an MP3 disc and 999 tracks and 250 groups on a
USB Memory. Those exceeding the maximum number
cannot be recognized.
– Playback order of MP3 tracks may be different from the one
you have intended while recording. If a folder does not
include MP3 tracks, they are ignored.
MP3 groups/tracks configuration
This System plays back MP3 tracks as follows.
The play order in the figure is for MP3 tracks on the disc.
MP3 tracks on USB Memory or DAP may be played
back differently.
Level 1
Level 2
Level 3
01
ROOT
02
1
2
01
Group with its play order
MP3 track with its play order
1

Additional Information

(see pages 9 to 14)
Level 4
Level 5
9
03
04
10
3
7
4
8
5
05
11
6
12
Playing Back a Tape:
• It is not recommended to use the C-120 or longer tapes.
These tapes easily jams in the pinch roller and capstan, and
may cause characteristic deterioration.
Quick Portable Link (QP Link):
• The system holds the On/Off status of QP Link even when
the AC Power cord is connected or removed.
• The source remains at AUX when you stop the other
equipment such as a digital audio player.
Daily Operations—Sound & Other Adjustments
(see pages 15 to 17)
Adjusting the Volume:
• Be sure to turn down the volume before connecting or putting
the headphones.
Adjusting the Sound:
• This function also affects the sound through the headphones.
• SOUND TURBO and AHB PRO cannot be used at the same
time.
Setting the Clock:
• "0:00" will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Turning off the Power Automatically:
• Auto Standby cannot be canceled by the following operations.
– Changing the display brightness.
– Adjusting the volume.
– Adjusting the sound.
Advanced Disc/USB Memory/DAP Operations
(see pages 18 to 20)
Programming the Playing Order—Program Play:
• If you try to program a 33rd track, "FULL" appears on the
display.
• While programming steps...
Your entry will be ignored if you have tried to program an item
number that does not exist on the disc (for example, selecting
track 14 on a disc that only has 12 tracks).
Advanced Tape Operations
Recording on a Tape:
• The recording level is automatically set correctly. Thus, you
can adjust the sound you are actually listening to without
affecting the recording level.
• There is leader tape which cannot be recorded onto at the start
and end of cassette tapes. Thus, when recording CDs or radio
broadcasts, wind the leader tape first to ensure that the
recording will be made without any music part lost.
• If you start recording with no cassette inserted, "NO TAPE"
appears on the display. If a protected tape has been inserted,
"NO REC" appears.
Synchronized Disc Recording:
• You cannot open the disc tray while recording.
(see pages 21 to 22)
26

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1520-005bSp-uxg45Ux-g45

Table of Contents