Setting The Clock; Turning Off The Power Automatically - JVC UX-G60 Instructions Manual

3
Adjust the parameter.
TV CH
TV CH
4
Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again while holding SHIFT.

Setting the Clock

Without setting the built-in clock, you cannot use Daily
Timers (see page 29) and Sleep Timer.
• To correct a mis-entry during the process, press CANCEL
(while holding SHIFT) or CLOCK/TIMER (while holding
SHIFT). You can return to the previous step.
1
Activate the clock setting mode.
CLOCK/TIMER
6
(while holding...)
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2
Set the time.
• Adjust the hour, then the minute.
PTY PTY
QP Link S V C D V D MP3 WMA
S.TURBO AHB PRO USB MIC V.MASK C.VOICE
PRGR. B.S.P. BONUS PRGM
Now the built-in clock starts working.
To check the current clock time during play
Source information
DISPLAY
Disc type
ENTER/SET
Remote
INFO
ONLY
D V D MP3 WMA 3DPHONIC L-
B PRO USB MIC V.MASK C.VO
BONUS PRGM RND 1 TA
ENTER/SET
3DPHONIC L-BANDIII AM FM
ST MONO
PG PL
1 2 3
1 TA NEWS INFO
RND
REC
SLEEP
A.STBY
REC
Clock

Turning Off the Power Automatically

Auto Standby
A.STANDBY
3
(while holding...)
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When disc play stops, the A.STBY indicator starts flashing.
If no operation is done for about 3 minutes while the
indicator is flashing, the System turns off (standby)
automatically.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning it off yourself.
1
Specify the time (in minutes).
SLEEP
2
(while holding...)
10 20 30 60
Canceled
2
Wait until the set time disappears.
To check the time remaining until the shut-off time, press
SLEEP while holding SHIFT.
• If you press the button repeatedly, you can change
the shut-off time.
Remote
ONLY
On
Canceled
90 120 150
14