Step 3: Hook Up - JVC CA-UXG45 Instructions Manual

3
Step : Hook Up
If you need more detailed information, see page 7.
For more detailed information on connecting external equipment, see page 13.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
Turn the power off to all components before connections.
For better FM/AM reception
Outdoor FM
antenna
(not supplied)
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna
using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
5
A M
E X T
A M
L O O
P
G N D
To a wall outlet
Plug the AC power cord only after all connections are complete.
• If the wall outlet does not match the AC plug, use the supplied AC
plug adapter.
AM loop antenna
Keep it connected.
Vynile-covered wire (not supplied)
Extend it horizontally.