Tenda W316R User Manual
  1. Manuals
  2. Brands
  3. Tenda Manuals
  4. Wireless Router
  5. W316R
  6. User manual

Tenda W316R User Manual

Wireless-n broadband router
Hide thumbs Also See for W316R:
Table of Contents

Advertisement

Quick Links

11N Wireless Broadband Router User Guide
Wireless-N Broadband Router
W316R
Notice：
RF Exposure Statement
To maintain compliance with FCC's RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
1

Advertisement

Table of Contents
loading

Related Manuals for Tenda W316R

Summary of Contents for Tenda W316R

  • Page 1 11N Wireless Broadband Router User Guide Wireless-N Broadband Router W316R Notice： RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

  • Page 2: Copyright Statement

    Copyright Statement is the registered tr ademark of Shenzhen Tenda Technology Co., Ltd. All the products and pr oduct names men tioned herei n are the tr ademarks or registered t rademarks of thei r respecti ve holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd.

  • Page 3: Table Of Contents

    11N Wireless Broadband Router User Guide Contents CHAPTER 1 PRODUCT INTRODUCTION ......... 1 1.1 P ................2 ACKAGE ONTENTS 1.2 LED I ........2 NDICATORS AND ESCRIPTION CHAPTER 2 PRODUCT INSTALLATION..........5 CHAPTER 3 HOW TO CONFIGURE TO ACCESS THE INTERNET ....................
  • Page 4 11N Wireless Broadband Router User Guide 6.1 DHCP S ..................49 ETTINGS 6.2 DHCP C ................50 LIENT CHAPTER 7 VIRTUAL SERVER ............52 7.1 P ............... 52 ANGE ORWARDING 7.2 DMZ S ..................56 ETTINGS 7.3 UPNP S ..................57 ETTINGS CHAPTER 8 SECURITY SETTINGS ............ 58 8.1 C ..............58 LIENT...
  • Page 5 11N Wireless Broadband Router User Guide APPENDIX 2 PRODUCT FEATURES ..........85 APPENDIX 3 FAQ ..................86 APPENDIX 4 CLEAR WIRELESS CONFIGURATION ....90 APPENDIX 5 REGULATORY INFORMATION ....... 94...

  • Page 6: Chapter 1 Product Introduction

    IEEE802. 11n standard, and i s backwar d compati ble wi th devi ces of IEEE802.11b/g standards. The W316R，including router, wireless AP, four-port switch and fi rewall in on e，provides powerful online monitor function and supports URL filter and MAC filter.

  • Page 7: Package Contents

    11N Wireless Broadband Router User Guide 1.1 Package Contents Please veri fy the fol lowing i tems afte r you open the package: One W316R Wireless Broadband Router One Quick Installation Guide One Power Adapter One Software CD If any of the l...
  • Page 8 11N Wireless Broadband Router User Guide LED indicator description on the front panel Back panel port show...
  • Page 9 11N Wireless Broadband Router User Guide Back panel port description...

  • Page 10: Chapter 2 Product Installation

    11N Wireless Broadband Router User Guide Chapter 2 Product Installation 1. Please use only the included power adapter to power y our r outer. ( NOTE: Use of an unmatched power adapter could cause damage to this product). 2. Pl ease connect the router ’s LA N port to your computer with an Ethernet cable as shown below.
  • Page 11 11N Wireless Broadband Router User Guide 3. Please connect your broadband line provided by your ISP to the router’s WAN port. 4. Insert the included software CD into the CD drive of your computer . After t he software automati cally initiates, double click the “Setup”...

  • Page 12: Chapter 3 How To Configure To Access The Internet

    11N Wireless Broadband Router User Guide Chapter 3 How to configure to acces s the Internet 3.1 How to Set the Network Configurations Network Configurations under windows XP 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2.
  • Page 13 11N Wireless Broadband Router User Guide 3. S elect “ Internet Pro tocol (TCP/IP) ” and click “Properties”. 4. Select “Obtain an IP address automatically” and...
  • Page 14 11N Wireless Broadband Router User Guide “Obtain D NS ser ver addr ess automatically ”. Click “OK” to save the configurations. Or select “Use the following IP address ” and enter the IP addr ess, Subnet mask, Defaul t gatewa y a s follows: IP Address: 192.168.0.XXX: (XXX i s a number from 2~254)
  • Page 15 11N Wireless Broadband Router User Guide Network Configurations under windows 7 1. Cli ck the network i con on the l ower ri ght corner of your computer desktop, and then cli ck” Open Network and Sharing Center”.
  • Page 16 11N Wireless Broadband Router User Guide 2. Click “Change adapter settings” on the left side of the window. 3. Ri ght click “Local Area Connecti on” and sel ect “Properties”.
  • Page 17 11N Wireless Broadband Router User Guide 4. Double click” Internet Protocol Version 4(TCP/IPv4)".
  • Page 18 11N Wireless Broadband Router User Guide 5. Select “Obtain an IP a ddress automatically” and “Obtain D NS ser ver addr ess automatically ”. Click “OK” to save the configurations. Or select “Use the following IP address ” and enter the IP addr ess, S ubnet mask, D efault gatewa y as follows:...

  • Page 19: Log In To The Router

    11N Wireless Broadband Router User Guide IP Address: 192.168.0.XXX: (XXX i s a number from 2~254) Subnet Mask: 255.255.255.0 Gateway: 192.168.0.1 DNS se rver: You s hould in put t he DNS s erver address provided by your IS P. Otherwise, you can enter 1 92.168.0.1.
  • Page 20 11N Wireless Broadband Router User Guide 2. Type “admin” in the “Password” field. Click “OK”. 3. If you enter the correc t password, you will come to the router’s web-based utility as is shown below.

  • Page 21: Fast Internet Access

    11N Wireless Broadband Router User Guide 3.3 Fast Internet Access Two kinds of fast access methods are provided on the router’s web-based utility: ADSL dial-up and DHCP. If you select ADSL dial-up, you only need to enter the access accou nt and access password as we ll as the wireless password, and then click “Ok”...
  • Page 22 11N Wireless Broadband Router User Guide The defaul t access meth od i s A DSL dial-up and the access accou nt and access password are the same as the ADSL dial-up account and password, which you can inquire your broadband ISP. For other access methods, please refer t o WAN settings in chapter 4.The wi reless password can only consist of 8 characters, the default is 12345678 and you can modify it when necessary.

  • Page 23: Fast Encryption

    11N Wireless Broadband Router User Guide 3.4 Fast Encryption The router provi des two encryption s etting screens, one i s si mple and easy , the other i s adv anced (For advanced setting, please refer to chapter 5.2). Simple and easy screen: Log on to the router’s web-based utility and you may set encrypti on for the...

  • Page 24: Chapter 4 Advanced Settings

    11N Wireless Broadband Router User Guide Chapter 4 Advanced Settings 4.1 System Status System status screen al lows you to view the route r’s WAN port status and system status. Connection status: It di splays the router ’s WAN connection status. Disconnected: It i ndicates the router ’s W AN por t hasn’t been connected with the network cable.
  • Page 25 11N Wireless Broadband Router User Guide Connection type: It displays your current access method. LAN MAC address ：It di splays the R outer’s LA N MAC address. WAN MAC address：It displays the Router’s WAN MAC Address. System t ime：It di splays the syste m’s updat ed time Connected client ：It displays the number of the connected c omputers(normally it displ ays the...

  • Page 26: Wan Settings

    11N Wireless Broadband Router User Guide 4.2 WAN Settings Virtual Dial-up (PPPoE) Mode: Show your current connection mode. Access Ac count: Enter the account provided by your ISP. Access Pas sword: Enter the passwo rd provi ded by your ISP. MTU: Maximum Transmission Unit.
  • Page 27 11N Wireless Broadband Router User Guide network. The default value is 1492. Do NOT modify it unless necessary, but if a specific website or web application s oftware c annot o pen o r b e e nabled, you can try to change the MTU value to 1450, 1400, etc.
  • Page 28 11N Wireless Broadband Router User Guide settings” from “System tools”. Static IP If your ISP provides you the stati c IP, pl ease cho ose static IP, and you need to enter the IP address, subnet mask, gateway, DNS serv er and al ternate DNS server provided by your ISP or network administrator。...
  • Page 29 11N Wireless Broadband Router User Guide DNS serv er: Enter th e necessary DNS server provided by your ISP. Alternate DNS serv er: Enter the second DNS address if your ISP provides, which is optional. Dynamic IP (Via DHCP) If your connection mode is Dynamic IP, it means every time you access the Internet, you will get a different IP.
  • Page 30 11N Wireless Broadband Router User Guide Mode: Show your current connection mode. PPTP server address: The IP address or domain name o f t he d estination server a nd it is u sed t o specify the desti nation addres s whi ch needs fo r PPTP connection.
  • Page 31 11N Wireless Broadband Router User Guide Subnet mask: Pl ease enter the subnet mask provided by your ISP ,generally its 255.255.255.0 Gateway: Please enter the gateway provided by your ISP, inquire your local ISP if you are not clear. All the above parameters are provided by ISP. L2TP Mode: Show your current connection mode.
  • Page 32 11N Wireless Broadband Router User Guide when connecting to the L2TP server. Address mode: Set the router’s IP address mode, you can select either “Dynamic” or “Static”. If your ISP doesn’ t provide the IP addre ss, pl ease sel ect “Dynamic”.

  • Page 33: Lan Settings

    11N Wireless Broadband Router User Guide 4.3 LAN Settings Click “ Advanced s ettings” –LAN s ettings to enter the following screen. LAN MAC address: The Router’s LAN MAC address, which is unchangeable. IP address: The Router’s LAN IP address (not your PC’s IP address).The default value is 192.168.0.1;...

  • Page 34: Dns Settings

    11N Wireless Broadband Router User Guide 4.4 DNS Settings DNS stands for Domain Name System (or Service). DNS setting: Select to enable the DNS server. Primary DNS address: Enter the necessary address provided by your ISP. Alternate DNS address : Enter the s econd DNS address if your ISP provides, which is optional.

  • Page 35: Bandwidth Control

    11N Wireless Broadband Router User Guide 4.5 Bandwidth Control Bandwidth control is used to limit the communication traffic of LAN computers w hen accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In addi tion, IP addres s r ange configuration i s supported.
  • Page 36 11N Wireless Broadband Router User Guide download. Bandwidth Range: The maximum and minimum upload/download data tr affic of the hosts i specified IP range. The unit is KByte/s. The uplink of upload and downl oad can not exceed the W AN port bandwidth limitation range.
  • Page 37 11N Wireless Broadband Router User Guide 1.Enter 192.168.0.100 in the IP address field 2.Select upload in the Upload/Download field. 3.Enter 10-15 in the bandwidth range field 4.Select “Enable” 5.Click “Add to list” 6.Click “Ok” to finish the upload rule settings. And then add a download rule as shown in the picture below.
  • Page 38 11N Wireless Broadband Router User Guide The setting method is the same as the above. Example 2 Set the downl oad r ate of all computers within the r ange of 192 .168.0.2--192.168.0.254 as 100-120KByte/s, and the upload rate as 20-30KByte/s, as shown in the picture below.
  • Page 39 11N Wireless Broadband Router User Guide The setting method is the same as Example 1.

  • Page 40: Traffic Statistics

    11N Wireless Broadband Router User Guide 4.6 Traffic Statistics Traffic statistics is used to display the bandwidth that LAN PC used. Enable Traffic statistics: It is used to calculate the traffic used by the LAN computers. You can enable it to calculate the tr affic for you.
  • Page 41 11N Wireless Broadband Router User Guide second, the unit is KByte/s. Sent mess age: the number of the cal culated computer’s data packets that are sent out through the router. Sent Byt es: the vol ume of the cal culated computer’s statistics that i s sent out through the router Received message: the number of the calculated...

  • Page 42: Chapter 5 Wlan Settings

    11N Wireless Broadband Router User Guide Chapter 5 WLAN Settings 5.1 Wireless Basic Settings Enable wireless functio n: Se lect t o enable t he Router’s wi reless features; desel ect to di sable it and all functions related with wireless are disabled. Wireless working mode : T his r outer p rovides two ki nds o f worki ng modes: Wi reless Access Point(AP) and Network Bridge (WDS)
  • Page 43 11N Wireless Broadband Router User Guide drop-down list. 11b mode：Select it if you have only Wireless-B clients in your network. 11g mode：Select it if you have only Wireless-G clients in your network. 11b/g mixed mode: Select it i f you h ave o nly Wireless-B and Wireless-G clients in your network.
  • Page 44 11N Wireless Broadband Router User Guide APSD Capa ble: It is used for auto power-saved service. The default is disabled. Channel b andwidth: Select an appropriate channel ba ndwidth to enhance the wi reless performance. Select 20/40M when the n etwork has 11b/g and 11n wi reless c lients.
  • Page 45 11N Wireless Broadband Router User Guide AP MAC ad dress: Input the MA C address of another (opposi ng) w ireless router y ou w ant to connect. Example: This example is to bridge two 316R routers. 1. If you know the connecti ng router ’s MA C address, please enter i t into the AP MAC address field and click “Ok”.
  • Page 46 11N Wireless Broadband Router User Guide 2. You can also search for the wi r eless router’s signal by scanning. Click “Open scan” and cl ick the scanned si gnal and click the ”O k” button on the di alog bo x and the corresponding wi reless MA C address will be added to the AP MAC address field automatically.
  • Page 47 11N Wireless Broadband Router User Guide Click “Ok” after the MAC address is added.

  • Page 48: Wireless Security Settings

    11N Wireless Broadband Router User Guide After fi nishing the abo ve steps, you need to set the other W316R router in the same way. NOTE: WD S feature requi res both routers support this function and the SSID, channel, encryption method and password are the same as those of the connecting router.

  • Page 49: Wps Settings

    11N Wireless Broadband Router User Guide intercepting or intruding your wireless network. 5.2.1 WPS Settings WPS (Wi-Fi Protected Setting) makes it quick and easy to establish a secure con nection between the wi reless clients and the router . The users onl y need to ente r a PIN cod e or press W PS b utton on the back panel configure it without ma nually s electing a n e ncryption method or set a key.
  • Page 50 11N Wireless Broadband Router User Guide WPS mode: Provide two ways: PBC (Push-Button Configuration) and PIN code. PBC: Select the PBC and cli ck Ok, or press and hold the WPS button on the back panel of the device for about one second.
  • Page 51 11N Wireless Broadband Router User Guide WPA Algor ithms: Provides TKI P [Temporal K ey Integrity Pro tocol] or AE S [Adv anced Encrypti on Standard]. Key: Enter the pass phr ase that consi sts of 8-63 ASCII characters. Key Renewal Inter val Set the key’...
  • Page 52 11N Wireless Broadband Router User Guide 5.2.3 WPA2- PSK WPA2 (Wi -Fi Protected Access versi on 2) pro vides higher security than and WPA (Wi-Fi Protected Access). WPA Algor ithms: Provides TKI P [Temporal K ey Integrity Pro tocol] or AE S [Adv anced Encrypti on Standard].

  • Page 53: Wireless Access Control

    11N Wireless Broadband Router User Guide 5.3 Wireless Access Control Wireless access control is actual ly based on the MAC address to permit or forbid specific clients to access the wireless network. MAC addres s filter: “Permit” indicates to allow the clients in the list to access the wi r eless network, “Forbid”...

  • Page 54: Connection Status

    11N Wireless Broadband Router User Guide 5.4 Connection Status This screen shows wi reless cl ient’s connecti on status, including MAC address, Channel bandwidth. MAC addres s: Shows the MAC addre sses of the hosts connected to the Router. Bandwidth: Shows the channel bandwidth of the current connected hosts (wireless clients).

  • Page 55: Dhcp Client List

    11N Wireless Broadband Router User Guide premise of acti vating “Obtai n an IP Address Automatically”. So specifying the start and end address of the IP Address pool is needed. DHCP s erver: Check the Enable box to enabl e DHCP server.
  • Page 56 11N Wireless Broadband Router User Guide are assi gned by the DHCP server . Y ou can manu ally enter the IP and MAC address and convert them to static assignment. Host name: It displays the name of the computer whose IP is allocated by the DHCP server.

  • Page 57: Chapter 7 Virtual Server

    11N Wireless Broadband Router User Guide Chapter 7 Virtual Server 7.1 Port Range Forwarding Start/End port: Enter the start/end port number which r anges the Externa l ports used to set th e server or Internet applications. LAN IP: Enter the IP address of the PC which you want to set as the server.
  • Page 58 11N Wireless Broadband Router User Guide protocol you are using, you can select “Both”. Enable: Click the Enable checkbox to bri n g the set rule into effect. Delete: Clear all settings of this item. Well-known service port: The well -known protocol ports are listed in the drop-down li st.
  • Page 59 11N Wireless Broadband Router User Guide and its port 21 will be added to the corresponding field automatically. 2. Enter 192. 168.0.10 in the LA N IP col umn, and then select “Both” as the protocol and select “Enable”. 3. As the picture shown below. 4.
  • Page 60 11N Wireless Broadband Router User Guide ftp://172.16.102.89:21 in the address field. NOTE: If you set the service port of the vi rtual server as 80, you must set the Web management port on R emote Web Management screen to be any v alue except 80 such as 8080.

  • Page 61: Dmz Settings

    11N Wireless Broadband Router User Guide 7.2 DMZ Settings The DMZ Setti ngs screen all ows one local computer to be exposed to the Internet for use of a special-purpose service such as Internet gaming or vi deoconferencing. DMZ hosting forwards all the ports at the same time to one PC.

  • Page 62: Upnp Settings

    11N Wireless Broadband Router User Guide 7.3 UPNP Settings UPnP (Universal Plug and Play).With the UPnP function, the internal host can request the router to process some special port switching so as to enable the external host to visit the resources of the internal host. Enable UPnP: Cli ck the checkbox to enabl e the UPnP.

  • Page 63: Chapter 8 Security Settings

    11N Wireless Broadband Router User Guide Chapter 8 Security Settings 8.1 Client Filter Settings You can ena ble cli ent f ilter to control LAN computers’ access to some ports of the Internet。 Filter Mode: You can select either “Permit only” or “Forbid only”.
  • Page 64 11N Wireless Broadband Router User Guide Port: Enter the controll ed TCP/UDP protocol port. You can specify a port or port range. Type: Sel ect one protoco l (T CP/UDP/Both) from the drop-down list. Time: Select the time range of client filter. Date: Select the day(s) to run the access policy.

  • Page 65: Mac Address Filter

    11N Wireless Broadband Router User Guide 18:00 from Sunday to Saturday. 8.2 MAC Address Filter You can limit the computer’s access to Internet by MAC Address Filter.
  • Page 66 11N Wireless Broadband Router User Guide Filter mode: You can select either “Permit only” or “Forbid only”. Access Poli cy: Sel ect one number from the drop-down list. Remark: A simple description of the configured file. You can also leave it blank. MAC Address: Enter the MAC address you want to run the access policy.
  • Page 67 11N Wireless Broadband Router User Guide of 00:E0:4C:69:A3:23 to access Intern et during 8:00 to 18:00 from Monday to Friday. Example 2 Permit the computer with the MAC address of 00 ：E4：A5：44：35：69 to access Internet from Monday to Friday.

  • Page 68: Url Filter Settings

    11N Wireless Broadband Router User Guide 8.3 URL Filter Settings You can use URL fil tering to forbi d t heir access to certain websites at a specified time. Filter Mode: You can select either “Permit only” or “Forbid only”. Access Poli cy: Select one number from the drop-down list.
  • Page 69 11N Wireless Broadband Router User Guide Time: Select the time range of URL filter. Date: Select the day(s) to run the access policy. Enable: To enable/disable the access poli c y (forbid /permit the packets matched wi t h the access policy to pass through the router).

  • Page 70: Remote Web Management

    11N Wireless Broadband Router User Guide NOTE: Enter only one domain name for each access policy for one access policy can only filter one domain name. So, if you want to filter multiple domain names, you need to set multiple access policies 8.4 Remote Web Management This secti on i nstructs how to al low the network...
  • Page 71 11N Wireless Broadband Router User Guide Enable: Check to enabl e remote web management. Port: The management port open to outside access. The default value is 80. IP Address: Specify the range of the IP addresses of the computers on the Internet for remote management.
  • Page 72 11N Wireless Broadband Router User Guide Router to implement remote web management. For example: If you want to configure the computer at the IP address of 218.88.93.33 to access the router’s web-based utility via port 8080, please set the parameters as above.

  • Page 73: Chapter 9 Routing Settings

    11N Wireless Broadband Router User Guide Chapter 9 Routing Settings 9.1 Routing Table This page shows the router’s core routing table. The main duty for a router is to look for a best path for every data p acket, and tr ansfer thi s data packet to a destination station.
  • Page 74 11N Wireless Broadband Router User Guide Destination network IP address : T he destination host or IP segment you visit. Subnet mask: Enter the subnet mask, generally it is 255.255.255.0 Gateway: The entry IP address of the next router. NOTE: 1.

  • Page 75: Chapter 10 System Tools

    11N Wireless Broadband Router User Guide Chapter 10 System Tools 10.1 Time Settings This secti on is to confi gure the router ’s system ti me. You can set it manually or obtain the GMT time from the Internet. Time zone: Select the time zone where you are operating the Router from the drop-down list.

  • Page 76: Ddns

    11N Wireless Broadband Router User Guide Internet. Only when you connect to the Internet and obtai n the GMT ti me or set the time on thi s screen, can the ti me set tings in othe r funct ions (e.g.

  • Page 77: Main Features

    For example: Establish a Web server i n the l ocal host 192. 168.0.10 and register in 3322.org as follows: Username T enda Password 1234 Domain Name tenda.3322.org After mapping the port in the virtual server, and setting...

  • Page 78: Backup/Restore

    11N Wireless Broadband Router User Guide account i nformation in DDNS serv er, y ou can then access the web page by enteri n g http://tenda.3322.org in the address field. 10.3 Backup/Restore On thi s screen, you can back up the router’s curr ent settings or restore previous settings.
  • Page 79 11N Wireless Broadband Router User Guide Click the “Save” button to save the c onfiguration files.
  • Page 80 11N Wireless Broadband Router User Guide Restore Setting: Click the “ Browse” button to sel ect the backup files. Click the “ Restore” button to restore previ settings.
  • Page 81 11N Wireless Broadband Router User Guide...

  • Page 82: Restore To Factory Default

    11N Wireless Broadband Router User Guide 10.4 Restore to Factory Default This screen allows you t o restore al l setti ngs to the factory default values. Restore: Click thi s butto n to restore to defaul t settings. Factory default settings: Password: admin IP address: 192.168.0.1 Subnet mask: 255.255.255.0...

  • Page 83: Reboot The Router

    11N Wireless Broadband Router User Guide upgrade file from our website, www.tenda.cn. Browse: Click thi s button to sel ect t he upgr ade file. Upgrade: Click this button to start the upgr ading process. After the upgr ade is completed, the router will reboot automatically.

  • Page 84: Password Change

    11N Wireless Broadband Router User Guide Reboot the r outer: Click th is butto n to reboot router. 10.7 Password Change This section is to set a new password to better secu re your router and network. Old password: Enter the old password. New password: Enter a new password.
  • Page 85 11N Wireless Broadband Router User Guide Confirm new password: Re-enter to confirm the new password. NOTE: To secure the router and your network, it is highly recommended t hat y ou c hange t he in itial password.

  • Page 86: Syslog

    11N Wireless Broadband Router User Guide 10.8 Syslog The secti on is to vi ew th e system l og. You can view various cond itions appearing after system start, an d also check whether there’ s an attack on the network. The log can record at most 150 entries.

  • Page 87: Log Out

    11N Wireless Broadband Router User Guide 10.9 Log out After all settings are finished, please click’” Log out” to exit securely and completely.

  • Page 88: Appendix 1 Glossary

    11N Wireless Broadband Router User Guide Appendix 1 Glossary Channel: An instance of medium use for the pu rpose of pa ssing protocol data uni ts (P DUs) that may be used simultaneously, in the same volume of space, with other instances of medium use(on other channel s) by ot her instances of the same ph ysical layer (PHY),wi th an...
  • Page 89 11N Wireless Broadband Router User Guide the network.WP A2 i s the second gen eration of WP A security and provides a stronger encryption mechanism through Advanced Encryption Standard (AES), which is a requirement for some government users. 802,1x authentication Static W EP k ey is d ifficult t o ma nage fo r wh en y ou change the key, you will have to i n form all others, and if the key is disclosed in one of the places, the key can no...

  • Page 90: Appendix 2 Product Features

    11N Wireless Broadband Router User Guide Appendix 2 Product Features Supports IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards. 5dBi hi gh gai n omn i-directional ant enna, wi th strong signals and long transmission distance. Wireless transmission rate up to 150Mbps Provides one 10/10 0Mbps auto...

  • Page 91: Appendix 3 Faq

    The i nstructions below may help you deal with the problems. If your problem is not in the list, please log into our website www.tenda.cn or send an E-mail to support@tenda.cn, and we wi ll reply to you at the earliest time.
  • Page 92 11N Wireless Broadband Router User Guide the R outer’s LA N IP addres s 192. 168.0.1 (op en “Command Prompt ” and type “Pi ng 19 2.168.0.1” a nd then enter). If it is OK, please make sure your browser does not access the Internet by proxy s erver.
  • Page 93 11N Wireless Broadband Router User Guide 1450 or 1400. 5.How to share my c omputer’s resource w ith other users in Internet？ If you want Internet users to access the internal server via the router such as: e-mail server, Web, FTP. You can configure the “Virtual Server”.
  • Page 94 11N Wireless Broadband Router User Guide WEB Server FTP Server Telnet T NetMeeting T 1503、1720 File Send:6891-6900(TCP) TCP/UDP Messenger Voice:1863、6901(TCP) Voice:1863、5190(UDP) PPTP VPN 1723 Iphone5.0 T 22555 SMTP T POP3 T...

  • Page 95: Appendix 4 Clear Wireless Configuration

    11N Wireless Broadband Router User Guide Appendix 4 Clear Wireless Configuration Clear Wirel ess configuration file under windo ws 1. Right click “My Network Places” on your computer desktop and select “Properties”. 2. Ri ght cli ck “W ireless Network Co nnections” a nd select “Properties”.
  • Page 96 11N Wireless Broadband Router User Guide 3. Click “Wireless Network Configuration” and clear the corresponding wi reless configuration fil e as sh own below. Clear Wireless configuration file und er windows 7 1. Right click “Network” and click “Properties”.
  • Page 97 11N Wireless Broadband Router User Guide 2. Click “Manage wireless networks” on the l eft side of the window. 3. De lete t he c orresponding c onfigured file in t he “Manage wireless networks”.
  • Page 98 11N Wireless Broadband Router User Guide...

  • Page 99: Appendix 5 Regulatory Information

    11N Wireless Broadband Router User Guide Appendix 5 Regulatory Information EU Declaration or Declaration of Conformity Hereby, SH ENZHEN T ENDA T ECHNOLOGY C O.,LTD, declares t hat t his W ireless Br oadband R outer is in compliance with t he e ssential r equirements a nd o ther relevant provisions of Directive 1999/5/EC.
  • Page 100 11N Wireless Broadband Router User Guide -Connect the equi pment into an outlet on a ci rcuit different from that to which the receiver is connected. -Consult the deal er or an experi enced radio/TV technician for help. To assure c ontinued compl iance, a ny changes or modifications not expres sly approved by the party responsible for compli...

Table of Contents