Toshiba TOSVERT VF-AS1 Instruction Manual page 3

■ Handling in general
Never disassemble, modify or repair the product.
▼
Disassembling the product may cause electric shocks, fire or injuries.
Disassembly
prohibited
For repairs, call your sales/repair agency.
▼ Do not attach this option to any inverter other than the VF-AS1.
It may lead to electric shocks or fire.
Prohibited
▼ When the inverter is energized, never detach the this option from the VF-AS1.
It may lead to electric shocks.
▼ Do not place or insert any kind of object into this option.
(electrical wire cuttings, rods, wires)
It may lead to electric shocks or fire.
▼ Do not splash water over the product, and do not wipe the body with a wet cloth.
It may lead to electric shocks or fire.
▼ Turn off input power before wiring and setting switches.
▼ Turn off the power immediately in case of any abnormalities such as smoke, smell or
Mandatory
abnormal noise.
Neglect of these conditions may lead to fire.
For repairs, call your sales/repair agency.
■ Transportation and installation
▼ Do not install or operate the inverter if it is damaged or any part of it is missing.
Operating a defective inverter may lead to electric shocks or fire.
Prohibited
For repairs, call your sales/repair agency.
▼ Do not put any flammable material near the product.
It may catch fire due to the product sparking in the case of a malfunction.
▼ Do not install in any location where the inverter may comes into contact with water or
other fluids.
It may lead to electric shocks or fire.
▼ When installing this option, be careful not to touch the leads from parts on the reverse
side of its circuit board.
It may lead to injury.
▼ Operate under the environmental conditions prescribed in the instruction manual.
Operations under any other conditions may lead to malfunction.
Mandatory
Danger
Danger
－ 2 －
E6581286②