Canon PIXMA MX860 series Getting Started page 27

Next, read "12 Install the Software" on page 26!
II
II
II
II
II
•
II
II
II
II
Connect the USB flash
drive on which you have
saved the network
information with the WCN
setting. When finished,
press. of the machine.
HI
WCN setting
~-+--c
Connect the USB flash drive to the Direct Print Port
(USB connector) (C) on the front of the machine, then
press the OK button.
When the completion screen appears, press the OK button.
The LAN settings screen returns. Remove the USB flash
drive from the machine.
WPS setting_ __ __
WeN setting
HI
WLAN settings
Select WeN setting, then
press the OK button.
HI
LAr~
settings
Change WLAN/LAN
WLAN
settings
WLAN setting list
LAN setting list
IPv4/IPv6 setting
WSD setting
.~Set
Select WLAN settings, then
press the OK button.
Wireless LAN active
HI
Change WLAN/LAN
~
.~Set
Make sure that Wireless LAN
active is selected and press
the OK button.