Canon PIXMA MX860 series Getting Started page 34

If the following dialog box appears
When the
Access Points
dialog box appears, select an
access point to use, then click
Connect.
When an access point is detected automatically, the Access
Points dialog box does not appear.
E~
... .....,lOloU"'prri8ftnd ...
~'W\II~
PIMs.~lhI~"'dlc:6:JN_l
When the
Setup Preparations
dialog
box appears, confirm that preparation
is complete, then click
Next.
o o
A
I
Turn on the machine
(A).
When the machine is recognized by the computer, a
message appears on the screen.
•
•
• To connect to the access point with WEP, WPA or WPA2 displayed
in the Encryption column, enter the network key, then click
Connect. For details on network keys, refer to "3.1 About Network
Key (Windows)/Network Password (Macintosh)" in the printed
manual: Network Setup Troubleshooting.
w _
• If installation does not continue after 10 minutes,
click Help on the screen in step
6,
then confirm the
message.
• If you want to select an access point manually, or if the target access
point is not displayed in the list, or if an error message appears, refer
to "5 The following screen is displayed during setup" in the printed
manual: Network Setup Troubleshooting.