Canon PIXMA MX860 series Getting Started page 12

Load plain paper in the
cassette and press
1!lI.
Head alignment is
recommended if you
print photos.
No head alignment
Perform head align
~~.~o
o
0
~Cop¥
. _ _ .
~» ~
Copies
01 :
E.I E.I ()
100%
~ ! ~
I
S.5 0 Xll 0 (LTR)
Plain paper
Standard
EVStart copy
Lift the Scanning Unit (Cover) (8) slightly and
fold the Scanning Unit Support (C), then gently
close the Scanning Unit (Cover) (8).
nun .
Wait until the screen above appears (about
g
4 minutes) and go to the next step.
• The machine may make some operating
noises when preparing to print. This is
normal operation.
• If an error message is displayed on the LCD, make
sure that the Print Head and the ink tanks are correctly
installed.
Load three or more sheets of A4
or Letter-sized plain paper into the
Cassette (0), then press the OK
button.
w _
• For details, refer to "24 Loading Paper"
on page 63.
• Close the Paper Output Tray to make it
easier to pull out the Cassette.
Press the OK button.
The standby screen is displayed.
w _
• For better print results, it is recommended that you align the Print Head before
printing photos. To align the Print Head, use the
A
or .. button to select
Perform head align and press the OK button. Follow the steps in "Align the
Print Head" on page 73 for alignment.
• You can perform Print Head Alignment at any time. For details, refer to the on-
screen manual: Basic Guide.