How To Operate The Digital Tv - NordicTrack Elite 4000 User Manual

An information box will ask if you want to connect
to the wireless network. Touch the Connect button
to connect to the network or touch the Cancel but-
ton to return to the list of networks. If the network
has a password, touch the password entry box. A
keyboard will appear on the screen. To view the
password as you type it, touch the Show Password
checkbox.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 23.
When the console is connected to your wireless
network, the WiFi menu option at the top of the
screen will display the word CONNECTED. Then,
touch the back button on the screen to return to the
wireless network mode.
To disconnect from a wireless network, select the
wireless network and then touch the Forget button.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The iFit mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to support.iFit.com for
assistance.
5. Exit the wireless network mode.
To exit the wireless network mode, touch the back
button on the screen.

HOW TO OPERATE THE DIGITAL TV

You can control the digital TV with the buttons on the
console, with the buttons on the top of the digital TV, or
with the remote control (see page 35).
1. Turn on the digital TV.
To turn on the digital TV, press the TV power
button.
2. Select an input source.
To switch between cable or antenna input and
another audio/visual input device such as a VCR,
DVD player, or Blu-ray player, press the Source but-
ton repeatedly. Select TV for cable or antenna input,
AV for a device connected to the digital TV with an
AV cable, or HDMI for a device connected with an
HDMI cable.
3. Select the desired channel.
To select the desired cable channel, press the
Chan increase and decrease buttons or the Key
Pad button. Note: If you press the Key Pad button,
a ten-number button pad will appear on the console
screen. Touch the numbers for the desired cable
channel.
When the buttons are pressed, a graphic will
appear on-screen to show which channel is
selected.
Note: The digital TV can identify and store in
memory all valid cable channels in your area (see
HOW TO ADJUST THE TV SETTINGS on page
36). The Chan increase and decrease buttons will
select only channels that are stored in memory. If a
satellite TV box, VCR, DVD player, or Blu-ray player
is connected and used as the input source, the
channel must be changed on the satellite TV box,
VCR, DVD player, or Blu-ray player.
34