How To Operate The Personal Television; How To Use The Stereo Sound System - NordicTrack C3000 Treadmill User Manual

HOW TO OPERATE THE PERSONAL TELEVISION

IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable or a VCR to the
75 ohm terminal on the treadmill, a VCR or DVD
player to the three audio/video RCA jacks, or a per-
sonal audio/video player to the audio/video jack
below the television on the console. See page 12.
Follow the steps below to operate the television.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16.
2. Press the TV button to select a television
source.
When you insert the key, the television will auto-
matically turn on. Select a television source by
pressing the TV button repeatedly.
If you have connected a 75 ohm CATV cable or a
VCR to the 75 ohm terminal on the treadmill, select
the tuner source. If you have plugged a DVD player
or VCR into the three audio/video RCA jacks, se-
lect the RCA source. If you have plugged a per-
sonal audio/video player into the audio/video jack
below the television on the console, select the MP4
source.
3. Press the Channel buttons to select the desired
channel.
When you turn on the television, the screen will
show the last channel that was selected. To select
a different channel, press the Channel buttons.
The selected channel number will appear on the
screen for a few seconds. To return to the last
channel selected, press the Previous button. Note:
The television is equipped with a channel memoriz-
ing function that allows you to go directly from the
current channel to the next channel saved in mem-
ory. Before channels can be selected in this way,
they must be saved in the television's memory.
See THE INFORMATION MODE on page 25.
4. Press the Volume buttons to adjust the volume.
When you press either Volume button, the volume
level indicator will appear on the screen for a few
seconds. To turn on or turn off the sound, press
the Mute button.
To use earphones or headphones (not included),
plug them into the headphone jack near the key on
the console.

HOW TO USE THE STEREO SOUND SYSTEM

This product has been designed specifically to work
with iPod and has been certified by the developer to
meet Apple performance standards. To play music or
audio books through the console's stereo speakers,
you must connect your own iPod, MP4 player, MP3
player, CD player, or other personal audio/video player
to the console through the audio/video jack or through
the Integrated Universal Dock for iPod.
To use the audio/video jack, locate the audio wire and
plug it into the audio/video jack near the speakers.
Then, plug the audio wire into a jack on your MP3
player, CD player, or other personal audio player.
Make sure that the audio/video wire is fully in-
serted. To use an MP4 player, you need an
audio/video cable. To purchase an audio/video cable,
see your local electronics store.
To use the Integrated Universal Dock for iPod, you
need an iFIT Universal iPod Connector. Plug one end
into the Integrated Universal Dock for iPod near the
speakers and the other end into your iPod. Make sure
that the iFIT Universal iPod Connector is fully
plugged in. To purchase an iFIT Universal iPod
Connector, please call the telephone number on the
front cover of this manual.
Next, press the TV button repeatedly until the word
MP4 appears on your screen. Press the Play button on
your iPod, MP4 player, MP3 Player, CD player, or
other personal audio/video player. Adjust the volume
on your personal audio/video player or press the
Volume increase and decrease buttons on the con-
sole.
If you are using a personal CD player or DVD player
and the CD or DVD skips, set the CD player or DVD
player on the floor or another flat surface instead of on
the console.
24