NordicTrack Elite 4000 User Manual page 17

21. Raise the Left Upright Cover (89), and connect
the coaxial cable from your wall (or device) to
the Upright Coaxial Cable (78).
Then, press the Left Upright Cover (89) and
the Right Upright Cover (not shown) onto the
Uprights (84) until they snap into place.
22. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 41 and 42). Note: Extra parts may be
included.
21
17
89
84
78