MTU 12 V 4000 C10 Operating Instructions Manual page 95

9. Use slotted screwdriver to check thrust ring
at both line ends for secure seating.
10. Tighten loose thrust ring to the specified tightening torque.
Name
Thrust ring
11. Coat screw head mating face (2) and
thread with engine oil.
12. Fit hold-down clamp (1) in correct position by hand. Tighten screw (2) with torque wrench to the specified
initial tightening torque.
Name
Screw
13. Fit O-rings (4) and (6) on high-pressure fuel line (5) and coat with grease.
14. Tighten high-pressure fuel line (5) to the specified initial tightening torque.
Name
HP line
15. Tighten screw (2) to specified torque using a torque wrench.
Name
Screw
Size Type
Tightening torque
Size Type
M12 Preload torque
Size Type
Preload torque
Size Type
M12 Tightening torque
Lubricant
Lubricant
(Engine oil)
Lubricant
(Engine oil)
Lubricant
MS150049/02E 2012-11 | Task Description | 95
Value/Standard
5Nm to 10Nm
Value/Standard
5Nm to 10Nm
Value/Standard
5Nm to 10Nm
Value/Standard
100Nm + 10Nm