MTU 12 V 4000 C10 Operating Instructions Manual page 131

7.19.3 Battery-charging generator – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 60-320Nm
Torque wrench, 10-60Nm
Ratchet adapter
WARNING
Heavy object.
Risk of crushing!
• Use appropriate lifting devices and appliances.
Removing battery-charging generator
1. Remove protective cover.
2. Mark electric cables on battery-charging generator and remove.
3. Protect all cables from damage.
4. Slacken screws (2) and (3) by half a turn.
5. Mount socket or box wrench on screw (4)
and press belt tensioner in direction of ar‐
row as far as the stop.
6. Tighten screw (2).
7. Remove drive belt (1).
Part No.
F30452768
F30452769
F30027340
MS150049/02E 2012-11 | Task Description | 131
Qty.
1
1
1