MTU 12 V 4000 C10 Operating Instructions Manual page 82

Checking grounding device
Item
Carbon brush
Press carbon brush against
spring pressure
Spring
Running surface on adapter
Cleaning running surface on adapter
1. Clean running surface of carbon brushes on adapter with cold cleaner.
2. Remove stubborn deposits with soft brush.
3. Blow out adapter with compressed air.
Installing grounding device
1. Check mounting surface on flywheel housing for cleanness.
2. Install grounding device on flywheel housing and secure with screws.
82 | Task Description | MS150049/02E 2012-11
Findings
Damaged
Wear limit 45 mm (new condition
60mm)
broken, damaged
contaminated, corroded
Measure
Fit new part (→ Page 83)
Fit new part (→ Page 83)
Fit new part (→ Page 83)
Clean