MTU 12 V 4000 C10 Operating Instructions Manual page 9

Installing the transport locking
device on driving end (KS), version
A
1. Screw holder (4) with spacer sleeves (5)
and screws (6) onto crankshaft. Spacer
sleeves (5), optional.
2. Tighten screws (6) with torque wrench to specified tightening torque.
Name
Screw
3. Screw nut (3) with washer (2) onto holder (4). Screw on carrier (1) with washer (7) and nut (8) and tight‐
en nut (8) to the specified tightening torque using the torque wrench.
Name
Nut
4. Secure with nut (3).
5. Mark the engine as "Fitted with transport locking device".
Removing the transport locking
device from driving end (KS),
version B
1. Release the locknuts (2) on both sides of
the flywheel housing, remove screw (3) and
take off holder (8).
2. Unscrew screws (5) and remove with wash‐
ers (4), cover plate (7) sign (6) and
plates (1).
3. Store the removed parts of the transport
locking device carefully for possible reuse
together with this documentation.
Size Type
M16 Tightening torque
Size Type
M24 Tightening torque
Lubricant Value/Standard
(Engine oil) 160Nm +16Nm
Lubricant Value/Standard
(Engine oil) 100Nm +10Nm
MS150049/02E 2012-11 | Safety | 9