Changing The Display Brightness; Turning Off The Key-Touch Tone; Adjusting The Front Speaker Output Balance; Reinforcing The Bass Sound - JVC CA-HXZ55D Instructions Manual

Changing the Display Brightness

You can dim the display window.
On the remote control ONLY:
Press DIMMER.
• Each time you press the button, the display dims and brightens
alternately.

Turning Off the Key-touch Tone

If you do not want the key-touch tone, you can deactivate it.
Press BEEP ON/OFF (or press and hold BEEP on
the front panel).
• Each time you press the button, the key-touch tone turns on and
off alternately.
When you deactivate the key-touch tone, the BEEP ON indicator
goes off from the display.

Adjusting the Front Speaker Output Balance

You can adjust the output balance of left front speaker and right
front speaker.
On the remote control ONLY:
1
Press LEVEL SELECT repeatedly until "L/R"
appears on the display.
2
Press
LEVEL + / –.
Adjust the output balance appropriately from the listening point
within the range of R (Right) –6 (minimum sound level from the
right speaker) to L (Left) –6 (minimum sound level from the left
speaker).

Reinforcing the Bass Sound

These function only affect the playback sound, but does not affect
your recording.
7 To enjoy heavy sound
You can enjoy heavy sound by using Sound Turbo. This function
boosts the low and high frequency sound.
• Activating Sound Turbo cancels the Sound mode and/or
Subwoofer level adjustment.
Press SOUND TURBO.
The SOUND TURBO indicator lights up on the display. The
Subwoofer level increases to the maximum level (S.WOOFER 4).
• Each time you press SOUND TURBO, Sound Turbo is turned on
(S.WOOFER 4) or off (S.WOOFER 1).
7 To
change the Subwoofer level precisely
You can select one of the 5 Subwoofer levels—S.WOOFER 0 (MIN
LEVEL), S.WOOFER 1 through S.WOOFER 4 (MAX LEVEL).
On the remote control:
1
Press LEVEL SELECT repeatedly until
"S.WOOFER" appears on the display.
2
Press
LEVEL + / –.
• To increase the Subwoofer level, press LEVEL +.
• To decrease the Subwoofer level, press LEVEL –.
On the front panel:
Press SUBWOOFER LEVEL + / –.
The SUBWOOFER indicator lights up when S.WOOFER 1 to
S.WOOFER 4 is selected. The SUBWOOFER indicator turns off
when S.WOOFER 0 is selected (no effect).
If you press SUBWOOFER LEVEL + / – during
activating Sound Turbo
Sound Turbo is canceled.
While connecting a pair of headphones
The Subwoofer level adjustment will be invalid.

Selecting the Sound Modes

You can select one of the 3 preset SEA—Sound Effect Amplifier—
modes and 3 user modes. This function only affects the playback
sound (front left and right channel only), but does not affect your
recording.
Press SOUND MODE repeatedly until the preferred
sound mode appears on the display.
• When one of the Sound modes is selected, the SOUND MODE
lamp flashes.
SOUND MODE D A N C E
R E C
SOUND MODE lamp
• Each time you press SOUND MODE, the Sound modes change as
follows:
ROCK POP
FLAT USER 3
(Canceled)
When you press SOUND MODE once
You can confirm the Sound mode currently chosen.
SEA (Sound Effect Amplifier) modes
ROCK:
Boosts low and high frequency. Good for acoustic
music.
POP:
Good for vocal music.
CLASSIC: Good for classical music.
User modes
USER 1/2/3: Your individual mode stored in memory. See
"Creating Your Own Sound Mode—User Mode" on
page 17.
FLAT:
The Sound mode is canceled.
While Sound Turbo is activated
The Sound mode is canceled.
H A L L S T A D I U M
CLASSIC
USER 2 USER 1
16