Connecting A Tv - JVC CA-HXZ55D Instructions Manual

To connect a center speaker and surround speakers
By connecting a center speaker to the CENTER SPEAKER jack and
surround speakers to the SURROUND SPEAKERS jacks, you can
enjoy multi-channel Surround modes. (See pages 18 to 20.)
Center
speaker
CENTER RIGHT
CENTER SPEAKER
CAUTION:
SPEAKER IMPEDANCE SPEAKER IMPEDANCE
8 16
Right surround
speaker
Ideal speaker layout
To enjoy multi-channel sound, locate speakers as follows. If you
cannot locate them like this, adjust the speaker setting by using the
choice menu. (See page 63.)
Center speaker
Left front
main speaker
Left surround
speaker
Placing the front subwoofer
You can place the front subwoofer wherever you like since bass
sound is non-directional. However, it is recommended to place it in
front of you.
DO NOT place a center speaker and surround
speakers on the front main speakers or the front
subwoofer.
LEFT
SURROUND SPEAKERS
CAUTION:
16 32
Left surround
speaker
Front
subwoofer
Right front
main speaker
Right surround
speaker

Connecting a TV

Connect your TV and this unit using the composite video cord
(supplied), an S-video cord (not supplied) or Component video cord
(not supplied).
• You can also connect a JVC's TV through the AV COMPU LINK
control system. (See page 67.)
VIDEO OUT
COMPONENT
P P Y
R B
S-video cord
(not supplied)
Component
video cord*
To S-video
(not supplied)
input
To component
video input
On video connection
• By using S-video or component video cord, you can get a better
picture quality—in the order: composite < S-video < component.
• To enjoy the progressive video picture, connect the TV
compatible with the progressive video input using component
video cord, then change the scanning mode correctly (see
"Changing the Scanning Mode" on page 17). You can enjoy the
progressive scanning mode only when the color system of your
TV is NTSC (see "To select the color system" on page 9).
NTSC/PAL switch
S-VIDEO VIDEO
NTSC PAL
Composite video
cord (supplied)
To composite
video input
TV
8