Connecting up
Connecting with TV
TV
To SCART connector
SCART cable (sold separately)
• In standby mode, set the RGB-Y/C selector
correctly according to your TV.
• When the TV accommodates the RGB video
signal, set the RGB-Y/C selector to RGB so
that you can enjoy better-quality pictures.
• When the TV accommodates the S-video
signal, set the RGB-Y/C selector to Y/C.
• When the TV accommodates the composite
video signal only, set the RGB-Y/C selector to
RGB.
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Main unit
Connecting directly
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
Connecting the power cord
Main unit
• Connect the power cord after all other
connections are complete.
• The STANDBY lamp (on the front panel) will be
lit.
TV (or
monitor)
Getting started
AC outlet
Supplied power cord
Connection
Main unit
11