Deployment Scenarios - Page - SonicWALL NSA 240 Getting Started Manual

Before You Register
You need a MySonicWALL account to register the SonicWALL
NSA appliance. You can create a new MySonicWALL account
on www.mysonicwall.com or directly from the SonicWALL
management interface. This section describes how to create an
account by using the Web site.
If you already have a MySonicWALL account, go to
and Licensing Your Appliance on MySonicWALL
register your appliance on MySonicWALL. You can also
postpone registration until after having set up the appliance.
Skip ahead to

Deployment Scenarios - page 17

your appliance directly from the management interface once
Activating Licenses in SonicOS - page 40.
you reach
For a High Availability (HA) configuration, you must use
MySonicWALL to associate a backup unit that can share the
Security Services licenses with your primary SonicWALL.
If you do not yet have a MySonicWALL account, you can use
MySonicWALL to register your SonicWALL appliance and
activate or purchase licenses for Security Services, ViewPoint
Reporting and other services, support, or software before you
even connect your device. This method allows you to prepare
for your deployment before making any changes to your
existing network.
Note that your SonicWALL NSA appliance does not need to be
powered on during account creation or during the
MySonicWALL registration and licensing process.
Page 12 Before You Register
Note:
Registering
- page 13
to
and register
After registering a new SonicWALL appliance on
MySonicWALL, you must also register the appliance
from the SonicOS management interface. This allows
the unit to synchronize with the SonicWALL License
Server and to share licenses with the associated
Activating Licenses in
appliance, if any. See
SonicOS - page 40
.