Verifying Management Interface Connectivity - SonicWALL NSA 240 Getting Started Manual

Verifying Management Interface
Connectivity
1. If your SonicWALL did not require a restart, skip to the
Verifying WAN (Internet) Connectivity section, on page 37.
Otherwise, continue with
step 2.
2. Wait for the SonicWALL NSA 240 to reboot. When the Test
LED is no longer lit, the SonicWALL NSA 240 is ready
for login.
3. If the login page does not display after reboot, open a Web
browser on the computer and manually navigate to the
LAN IP address of your SonicWALL NSA 240.
4. Using your new username and password, login to the
appliance.
Page 36

Verifying Management Interface Connectivity

The System > Security Dashboard page (shown below)
displays. You have correctly configured the SonicWALL NSA
240 to work with the computer on your LAN. Complete the next
section to verify WAN (Internet) connectivity.