Product Safety And Regulatory Information - SonicWALL NSA 240 Getting Started Manual

Verifying Your Connection
After the card has been set up on your PC, you can view your
connection type and verify that the WWAN PC card is
transferring data. In order for the connection testing to be valid,
it is important that you first disable all other network
connections, such as a WiFi or LAN connection, before
continuing. Leave only your PC card connection enabled.
1. Use the software that came with your WWAN PC card to
initialize a connection with your service provider.
2. In the Windows interface, select Start > Run.
3. Enter "cmd" in the Open field and click the OK button.
4. At the prompt, type the command "ipconfig" and press
Enter on the keyboard.
Note:
The name of your Ethernet adaptor may differ from
the screenshot below. Common names for newly
acquired cards are "Local Area Connection 2" or "Local
Area Connection 3."
5. Your network device status will display. Verify that you have
obtained an IP Address for your Ethernet adaptor, and that
all other Local Area Network Connections display "Media
disconnected" as their status.
6. Open a Web browser and navigate to a Website, such as
<http://www.sonicwall.com>,
connection can transfer data.
Congratulations! You have set up and provisioned your
WWAN PC card.
SonicWALL NSA 240 Getting Started Guide
to verify that your
Page 9