Table of Contents
Advertisement
Operating when on the move (remote operation)
You can check your answering machine from any other telephone (hotel, pay phone etc.).
Prerequisites:
◆
You have set a system PIN other than 0000 (
◆
The phone you are using for remote operation has tone dialling (DTMF) i. e., you hear different tones when you press
the keys.
Calling the answering machine and playing messages
~
(Dial your own number.)
The following keys are used for operation:
A
During the number/date/time announcement: Skip to the start of the previous message.
During the message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
Activating the answering machine
~
(Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
~
¤
Enter system PIN
Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The
answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from
your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
¢
and to use fast access (
¤ q
§Menu§
Answer Machine
Locating a handset (paging)
You can locate your handset using the base station.
¤
Briefly press the registration/paging key on the base station (
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base station (
a
end call key
on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base sta-
tion in order for it to work properly!
1) On the handset
¤ q
¤
§Menu§
Settings
¤
¤
§OK§
ting: 0000)
Registering is displayed.
2) On the base station
Within 60 seconds, press and hold the registration/paging key on the base station (
(A410A only: There is a tone played if the registration mode is activated.)
Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly
shows HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the
internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.
¢
¤
When you hear your announcement, press
page 1), you will need to enter the number in your phone:
¤ q
¤
§OK§
Net Mailbox
¤ q
¤
§OK§
§OK§
Handset
12
page 24).
~
¤
(enter number)
¢
page 2).
¤ q
¤
Register HS
Enter the base station system PIN (default set-
9
and enter the system PIN.
¢
page 9), the menu (
¤
§OK§
¢
page 2) or press the talk key
¢
page 2) for approx. 3 seconds.
¢
page 23)
c
or the
Advertisement
Table of Contents
