First Steps; Check The Package Contents; Connecting The Base Station - Gigaset A410 User Manual

First steps

Check the package contents

Base station and handset package: One Gigaset handset, one Gigaset A410/A410A base station, one mains adapter,
one phone cord, two batteries, one battery cover, one user guide.
Handset and charging cradle package: One Gigaset handset, one charging cradle with mains adapter, two batteries,
one battery cover, one user guide.
If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and
a charging cradle with mains adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
+45 °C.
¤
Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also
mount the base station and charging cradle on the wall.
Please note
Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m
inside buildings.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and
polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
Care: Wipe down the base station, the charging cradle and the handset with a damp cloth (no solvents) or an antistatic
cloth. Never use a dry cloth. This can cause static.
Please note:
◆
Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base station

¤
First connect the mains adapter
¤
Then connect the telephone jack
cables into the cable ducts.
Please note:
◆
The mains adapter must always be connected, as the
phone will not operate without mains connection.
◆
Only use the mains adapter and phone cord supplied.
Pin connections on telephone cables can vary.
◆
The answering machine (A410A only) is ready for use
approx. 30 seconds after the base station has been con-
nected.
Connecting the charging cradle (if included)
2
1
.
2
and insert the
¤
Connect the flat plug from the power
1
supply .
¤
Plug the mains adapter into the plug
1
2
socket .
If you need to disconnect the plug from the
charging cradle, press the release button
and disconnect the plug
4
A410A
1 1
A410
2 1
4
.
2 1
1 1
4
3 3