Table of Contents
Advertisement
The base station at a glance
Basis A410A
2
6
1
Basis A410
ECO DECT
During a call, the transmission power is automatically adjusted to the distance between handset and base station,
the smaller the distance, the lower the transmission power (radiation). In idle status the transmission power of the
handset is switched off. Only the base station ensures contact with the handset using low radio signals.
Your phone offers you the opportunity to further reduce the transmission power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree
during a call is reduced up to 80% at half range.
2) Deactivating transmission power (eco mode+)
With the setting No Radiation (menu tree
standby mode completely. Please note:
◆
All registered handsets must support this feature.
◆
For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods.
This increases energy consumption and therefore reduces the standby and talk times.
2
1 Registration/Paging key:
Search for handsets (press briefly, paging
Register handsets (press and hold
2 Volume keys: (– = quieter; + = louder)
During message playback: adjust the speaking volume.
While the phone is ringing: adjust the ringer melody volume.
5
4
3 Play/Stop key:
Switch answering machine on and off (press and hold);
3
play back new messages from answering machine (press briefly);
during message playback: cancel playback (press briefly).
Lights up: answering machine is activated.
Flashes: at least one new message is present or message is played
back or being recorded.
Flashes very quickly: memory is full.
During message playback:
4 Skip to the start of the current message (press once) or go to the pre-
1
vious message (press twice).
5 Go to the next message.
6 Delete current message.
¢
page 24), the transmission power in standby mode and
¢
page 24), you turn off the transmission power of the base station in
¢
page 12).
¢
page 12).
Advertisement
Table of Contents
