Table of Contents
Advertisement
2.4. Reset to Default Configuration
The DSA-2101/2102 can be reset to the original default configuration setting if necessary.
1. When powering-off, use a pen or a clip to push the RESET button in the rear panel;
hold the button. See Figure 2-2.
2. Connect the power plug to turn the player on.
3. After a few seconds, the Status Indication LED will light up for 3 seconds and turn off.
4. Release the RESET button. The configuration setting of the player has been reset to
the factory default.
The default configuration of the DSA-2101/2102 is listed as follows:
Configuration
1.
IP of the DSA play
2.
Server URL
3
Internal web server
4
Polling interval
5
Video output port
6
Video output resolution
7
Max number of scroll text
© 2007 Advantech Co., Ltd. All rights reserved.
Figure 2-2
Default Setting
192.168.1.100
192.168.1.1
Port 8000
60 seconds
DVI-I
1024*768 @ 60Hz
3
8
Advertisement
Table of Contents
