Table of Contents
Advertisement
7.
Once the installation finishes, you will see the icons of "DSA Composer" and
"DSA Configurator" on your desktop as shown below:
8.
Now you can begin configuring the Composer program by continuing to the
steps in Chapter 3.
2.4 Reset to Default Configuration
The DSA-2101/2102 can be reset to the original default configuration setting if neces-
sary.
1.
Use a pen or a clip to push the RESET button in the rear panel; hold the button
for a second or two.
2.
Connect the power plug to turn the player on.
3.
After a few seconds, the Status Indication LED will light up for 3 seconds and
turn off.
4.
Release the RESET button. The configuration setting of the player has been
reset to the factory default.
The default configuration of the DSA-2101/2102 is listed as follows:
Configuration
1
IP of the DSA play
2
Server URL
3
Internal web server
4
Polling interval
5
Video output port
6
Video output resolution
7
Max number of scroll text
DSA-2130E User Manual
Default Setting
192.168.1.100
192.168.1.1
Port 8000
60 seconds
DVI-I
1024 * 768 @ 60 Hz
3
10
Advertisement
Table of Contents
