3. Plug the USB storage into the DSA player when it's power off, and then turn on the
player. It will load the play-list & media files into the internal memory drive.
3.8.2. Export to Player Directly
DSA Composer provides a convenient method to export a program to the player via
network or direct cable connection. Exporting is accomplished by a built-in tiny browser
running in the background and you have to keep the Composer up and running until the
DSA Player downloads the program completely. The program will be loaded to the
directory in a local drive where the DSA player will download the newly updated play-list
automatically based on the player's default setting. The program will be automatically
saved before exporting.
3.8.2.1
1. Please make sure your PC/Notebook IP address is set to 192.168.1.1 and the Net
Mask is 255.255.255.0
2. Connect a "cross over" type of network cable between your PC and the Player
3. Click on "To Player" and you will have a "Export Successfully" message after the
upload is complete
4. The Player will start the download within 60 seconds (default)
3.8.2.2
1. Please make sure your PC/Notebook IP address is set to 192.168.1.1 and the Net
Mask is 255.255.255.0
2. Connect your PC to the network.
3. Click on "To Player" and you will have a "Export Successfully" message after the
upload is complete
4. The Player will start the download within 60 seconds (default)
© 2007 Advantech Co., Ltd. All rights reserved.
Export via Direct Cable Connection
Export via LAN
19