Personnel Programming; Clerk - Sharp XE-A307 Instruction Manual

Personnel Programming

Use the following procedure to select any option included in the personnel group:
Procedure
The following illustration shows those options included in this programming group.
5 PERSONNEL

■ Clerk

Procedure
To delete a clerk code in the "CLERK" window, select the clerk code and press the
NOTE
A confirmation window appears to ask you whether to delete the clerk, select the option you
prefer.
1.
In the SETTING window, select "5 PERSONNEL."
2.
Select any option from the following options list.
1 CLERK
2 MANAGER
3 MODE PASS CODE
4 TRAINING CLK
Program each item as follows:
• PASS CODE (Use the numeric entry)
Pass code (max. 4 digits: 0001 to 9999/0000)
• Text (Use the character entry)
Description for the clerk name (Up to 16 characters can be
entered.)
• AUTO KEY (Use the selective entry)
ENABLE: Enables operation of the
DISABLE: Disables operation of the
• The PERSONNEL window will appear.
1 CLERK
2 MANAGER
3 MODE PASS CODE
4 TRAINING CLK
l
See "Clerk" this page.
l
See "Manager" on page 88.
l
See "Mode Pass Code" on page 88.
l
See "Training Clerk" on page 89.
87
Clerk
Manager
Mode pass code
Training Clerk
V key.
key.
V
D key.