Wireless Status - TP-Link Archer D2 User Manual

Archer D2 AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Beacon Interval: Enter a value between 25-1000 milliseconds for Beacon Interval here. The

beacons are the packets sent by the modem router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold: Here you can specify the RTS (Request to Send) Threshold. If the packet is

larger than the specified RTS Threshold size, the modem router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
2346.
DTIM Interval: This value determines the interval of the Delivery Traffic Indication Message

(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to
broadcast and multicast messages. When the modem router has buffered broadcast or
multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value.
You can specify the value between 1-255 Beacon Intervals. The default value is 1, which
indicates the DTIM Interval is the same as Beacon Interval.
Enable Short GI: It is recommended to Enable Short GI, which will increase the data

capacity by reducing the guard interval time.
Enable WMM: This function guarantee the packets with high-priority messages being

transmitted preferentially. It is strongly recommended to enable WMM.

Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the
provided default values; otherwise it may result in lower wireless network performance.
4.8.7

Wireless Status

Choose menu "Wireless 2.4GHz""Wireless Status", you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
MAC Address: The connected wireless station's MAC address.

Current Status: The connected wireless station's running status

Received Packets: Packets received by the station.

Sent Packets: Packets sent by the station.

SSID: The wireless network name.

Click on the Refresh button to update this page.
Figure 4-40
50
.