Wireless Status; Guest Network; Basic Settings - TP-Link TD-W8970 User Manual

TD-W8970

4.8.7 Wireless Status

Choose menu "Wireless""Wireless Status", you can see the MAC Address, Current Status,
Received Packets and Sent Packets for each connected wireless station.
MAC Address: The connected wireless station's MAC address

Current Status: The connected wireless station's running status.

Received Packets: Packets received by the station.

Sent Packets: Packets sent by the station.

SSID: Name of the wireless network that the wireless station connects to.

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.

4.9 Guest Network

There are two submenus under the Guest Network menu: Basic Settings and Guest Network
Status. Click any of them, and you will be able to scan or configure the corresponding function.
The detailed explanations for each submenu are provided below.
4.9.1

Basic Settings

Choose menu "Guest Network""Basic Settings", and you will see the screen as shown in
Figure 4-44. This feature allows you to create a separate network for your guests without allowing
them to access your main network and the computers connected to it.
Guest Network: Check this box to enable Guest Network. And you can set wireless

parameters for guest network as shown in Figure 4-45.
300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-43
Figure 4-44
51