Lan Host - TP-Link Archer D2 User Manual

Archer D2 AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
 Status: Here displays the status of the rule, enabled or not.
 Edit: Here you can edit or delete an existing rule.
Click the Enable /Disable Selected button to enable or disable the selected rules in the list.
Click the Delete Selected button to delete the selected entries in the table.
The methods to add a new rule:
1. Click the Add New button and the next screen will pop up as shown in Figure 4-78.
2. Give a name (e.g. Rule_1) for the rule in the Description field.
3. Select a host from the LAN Host drop-down list or choose "Add LAN Host".
4. Select a target from the WAN Host drop-sown list or choose "Add WAN Host".
5. Select a schedule from the Schedule drop-down list or choose "Add Schedule".
6. In the Action field, select Deny or Allow to deny or allow your entry.
7. In the Status field, select Enabled or Disabled to enable or disable your entry.
8. In the Direction field, select IN or OUT from the drop-down list for the direction.
9. In the Protocol field, there are four options: All, TCP, UDP, and ICMP. Select one of them
from the drop-down list for the target.
10. Click the Save button.

4.16.2 LAN Host

Choose menu "Firewall" → "LAN Host", and then you can view and set a Host list in the screen
as shown in Figure 4-79.
Figure 4-78
80