TP-Link Archer D2 User Manual page 56

Archer D2 AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Disable Wireless Security: If you do not want to use wireless security, check this radio

button. But it's strongly recommended to choose one of the below modes to ensure security.
WPA/WPA2-Personal: It's the WPA/WPA2 authentication type based on pre-shared

passphrase. It is chosen by default.
Authentication Type: You can choose the type for the WPA/WPA2-Personal security from
•
the drop-down list. The default setting is WAP2-PSK.
Encryption: You can select Auto, TKIP or AES as Encryption.
•
Wireless Password: You can enter ASCII characters between 8 and 63 characters or 8 to
•
64 Hexadecimal characters. The default password is the same with the default PIN code,
which is labeled on the bottom of the modem router or can be found in Figure 4-32.
Group Key Update Period: Specify the group key update interval in seconds. The value
•
should be 30 or above. Enter 0 to disable the update.
WPA/WPA2 – Enterprise: It's based on Radius Server.

Authentication Type: You can choose the type for the WPA/WPA2-Enterprise security
•
from the drop-down list. The default setting is Auto, which can select WPA or WPA2 as
Figure 4-35
45