TP-Link Archer D2 User Manual page 69

Archer D2 AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.
MAC Address: The wireless station's MAC address that you want to filter.

Status: The status of this entry either Enabled or Disabled.

Host: The wireless network name (SSID).

Description: A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New button. The following page will
appear, shown in Figure 4-48:
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX:XX:XX:XX:XX:XX
00:1D:0F:11:22:33.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
3. Select Enabled or Disabled for this entry from the Status drop-down list.
4. Select Host from the drop-down list.
5. Click the Save button to save this entry.
To edit or delete an existing entry:
1. Click the Edit in the entry you want to modify.
2. Modify the information.
Figure 4-47
Figure 4-48
(X is any hexadecimal
58
digit). For example: