Wireless 5Ghz; Basic Settings - TP-Link Archer D2 User Manual

Archer D2 AC750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
4.9

Wireless 5GHz

There are seven submenus under the Wireless 5GHz menu: Basic Settings, WPS Settings,
Wireless Security, Wireless Schedule, Wireless MAC Filtering, Wireless Advanced and
Wireless Status. Click any of them, and you will be able to configure the corresponding function.
4.9.1

Basic Settings

Choose menu "Wireless 5GHz" → "Basic Settings", you can configure the basic settings for the
wireless network of 5GHz on this page.
 SSID: Wireless network name. Enter a desired SSID which is case-sensitive and must not
exceed 32 characters.
 Region: Select your region from the drop-down list. This field specifies the region where the
wireless function of the modem router can be used. It may be illegal to use the wireless
function of the modem router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for assistance.

Note:
Limited by local law regulations, version for North America does not have region selection option.
:
 Mode
Select the desired mode.
11an mixed - Select if you are using both 802.11a and 802.11n wireless clients.
11a/n/ac mixed - Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless
clients. It is strongly recommended that you set the Mode 11a/n/ac mixed.
Figure 4-41
51