Specifications - JVC RM-SR630RU Instructions Manual

Specifications

Amplifier
Output Power
Total Harmonic Distortion
(8 ohms, 1 kHz)
Audio Input Sensitivity/
Impedance (1 kHz)
Audio Output Level
Signal-to-Noise Ratio
('66 IHF/DIN)
Frequency Response (8 ohms)
RIAA Phono Equalization
Loudness Control
(Volume Control at –40 dB)
S.E.A.
Video
Video Input Sensitivity/Impedance
Video Output Level
Synchronization
Signal-to-Noise Ratio
Page 39
At Stereo operation
Front Channels
At Surround operation
Front Channels
Center channel
Rear channels
PHONO (MM)
CD, VCR, VIDEO, TV SOUND,
TAPE
TAPE, VCR
PHONO
CD, VCR, VIDEO, TV SOUND,
TAPE
PHONO
CD, VCR, VIDEO, TV SOUND,
TAPE
Center Frequencies
Control Range
VCR, VIDEO
VCR, MONITOR OUT
80 watts per channel. min. RMS, both channels driven into
4 ohms at 1 kHz with no more than 0.9 % total harmonic
distortion. (IEC268-3/DIN)
70 watts per channel, min. RMS, both channels driven into
8 ohms at 1 kHz with no more than 0.9 % total harmonic
distortion. (IEC268-3/DIN)
65 watts per channel, min. RMS, both channels driven into
8 ohms, 40 Hz to 20 kHz with no more than 0.06 % total harmonic
distortion.
70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz with
no more than 0.7 % total harmonic distortion.
70 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
than 0.7 % total harmonic distortion.
70 watts per channel, min. RMS, driven into 8 ohms at 1 kHz,
with no more than 0.7 % total harmonic distortion.
0.06 %* at 65 watts output
(* Measured by JVC Audio Analysis System)
2.5 mV/47 k ohms
230 mV/47 k ohms
230 mV
70 dB/66 dB
87 dB/67 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 20 kHz (±1 dB)
±0.5 dB (20 Hz to 20 kHz)
+6 dB ±1 dB at 100 Hz
+4 dB ±1 dB at 10 kHz
100 Hz, 1 kHz, 10 kHz
±10 dB ±2 dB
1 Vp-p/75 ohms
1 Vp-p (at 1 Vp-p input)
Negative
45 dB