Setting The Component Video Input; Memorizing The Volume Level For Each Source - JVC RX-7040B Instructions Manual

7 Digital optical terminals—DGTL IN OPTICAL
Set the components connected to the digital optical terminals
(DIGITAL 2 – 4).
• As you turn MULTI JOG, the digital optical input terminals
are set to used for following digital components:
When "DIGITAL 1 (DGTL IN COAX)" is set to "DVD":
2: CD 3: TV (or DBS*
2: CD 3: TV (or DBS*
2: CD 3: VCR
2: VCR 3: TV (or DBS*
(back to the beginning)
When "DIGITAL 1 (DGTL IN COAX)" is set to "CD":
2: DVD 3: TV (or DBS*
2: DVD 3: TV (or DBS*
2: DVD 3: VCR
2: VCR 3: TV (or DBS*
(back to the beginning)
When "DIGITAL 1 (DGTL IN COAX)" is set to "TV" or
"DBS"* 1 :
2: CD 3: DVD
2: CD 3: DVD
2: CD 3: VCR
2: VCR 3: DVD
(back to the beginning)
When "DIGITAL 1 (DGTL IN COAX)" is set to "CDR":
2: CD 3: TV (or DBS*
2: CD 3: TV (or DBS*
2: CD 3: VCR
2: VCR 3: TV (or DBS*
(back to the beginning)
When "DIGITAL 1 (DGTL IN COAX)" is set to "VCR":
2: CD 3: TV (or DBS*
2: CD 3: TV (or DBS*
2: CD 3: DVD
2: DVD 3: TV (or DBS*
(back to the beginning)
If you have changed the source name from "TV" to "DBS,"
* 1
"DBS" appears (see page 17).

Setting the component video input

When you use the component video inputs for connecting the DVD
player and/or DBS tuner (or VCR), register the type of input jacks.
If you have not selected appropriate video input jacks, the AV
COMPU LINK remote control system cannot operate properly. (See
page 38.)
7 For the DVD player—VIDEO IN DVD
Select one of the following:
VIDEO DVD: CMPNT
VIDEO DVD: S/C
26
"
1
) 4: CDR
"
1 ) 4: VCR
"
4: CDR
"
1
) 4: CDR
"
1 ) 4: CDR
"
1 ) 4: VCR
"
4: CDR
"
1 ) 4: CDR
"
4: CDR
"
4: VCR
"
4: CDR
"
4: CDR
"
1 ) 4: DVD
"
1
) 4: VCR
"
4: DVD
"
1 ) 4: DVD
"
1
) 4: CDR
"
1 ) 4: DVD
"
4: CDR
"
1
) 4: CDR
Select when connecting the DVD
player to the component video input
jacks.
Select when connecting the DVD
player to the composite video or
S-video input jacks.
7 For the DBS tuner—VIDEO IN DBS
Select one of the following:
VIDEO DBS: CMPNT*
VIDEO DBS: S/C
Notes:
• If you have selected "CMPNT" for the component video setting
for the VCR (VIDEO IN VCR), this setting is not available.
When you have selected this setting, the component video
* 2
setting for the VCR (VIDEO IN VCR) is not available.
7 For the VCR—VIDEO IN VCR
Select one of the following:
VIDEO VCR: CMPNT*
VIDEO VCR: S/C
Notes:
• If you have selected "CMPNT" for the component video setting
for the DBS tuner (VIDEO IN DBS), this setting is not available.
* 3 When you have selected this setting, the component video
setting for the DBS tuner (VIDEO IN DBS) is not available.

Memorizing the volume level for each source

This unit memorizes some settings separately for each source.
In addition, you can store the volume level for each source with the
other memorized settings—One Touch Operation.
• This receiver memorizes the volume level—
– when you change the source, or
– when you change the source name.
7 One Touch Operation—ONE TOUCH OPE
Select one of the following:
ONE TOUCH: ON Select to store the volume level
separately for each source. (The ONE
TOUCH OPERATION indicator lights
up on the display.)
ONE TOUCH: OFF Select this not to store the volume level.
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume
level for the currently selected source is recalled when the
source is selected.
To cancel the One Touch Operation
Set One Touch Operation to "OFF" so that the ONE TOUCH
OPERATION indicator goes off from the display.
2 Select when connecting the DBS
tuner to the component video input
jacks.
Select when connecting the DBS
tuner to the composite video or
S-video input jacks.
3 Select when connecting the VCR to
the component video input jacks.
Select when connecting the VCR to
the composite video or S-video input
jacks.