Specifications - JVC RX-772VBK Instructions Manual

Specifications

Amplifier
Output Power
Total Harmonic Distortion
(8 ohms, 1 kHz)
Audio Input Sensitivity/
Impedance (1 kHz)
Audio Output Level
Signal-to-Noise Ratio
('66 IHF/'78 IHF)
Frequency Response (8 ohms)
RIAA Phono Equalization
Loudness Control
(Volume Control at –40 dB)
S.E.A.
Video
Video Input Sensitivity/Impedance
Video Output Level
Synchronization
Signal-to-Noise Ratio
On-Screen Color System
Page 47
At Stereo operation
At Surround operation
Front Channels
Center channel
Rear channels
PHONO (MM)
CD, TAPE, TV SOUND, VCR,
VIDEO
TAPE, VCR
PHONO
CD, TAPE, TV SOUND, VCR,
VIDEO
PHONO
CD, TAPE, TV SOUND, VCR,
VIDEO
Center Frequencies
Control Range
VCR, VIDEO
VCR, MONITOR OUT
110 watts per channel, min. RMS, both
channels driven into 8 ohms, 20 Hz to 20 kHz
with no more than 0.06 % total harmonic
distortion.
110 watts per channel, min. RMS, driven into 8 ohms at 1 kHz
with no more than 0.8 % total harmonic distortion.
110 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
than 0.8 % total harmonic distortion.
110 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
than 0.8 % total harmonic distortion.
0.06 %* at 110 watts output
(* Measured by JVC Audio Analysis System)
2.5 mV/47 k ohms
230 mV/47 k ohms
230 mV
70 dB/78 dB (at REC OUT)
87 dB/80 dB
20 Hz to 20 kHz (±1 dB)
20 Hz to 20 kHz (±1 dB)
±0.5 dB (20 Hz to 20 kHz)
+6 ±1 dB at 100 Hz
+4 ±1 dB at 10 kHz
100 Hz, 1 kHz, 10 kHz
±10 dB ±2 dB
1 Vp-p/75 ohms
1 Vp-p/75 ohms
Negative
45 dB
NTSC