JVC RX-772VBK Instructions Manual page 37

Selecting the Surround Modes
1. Press MENU.
The MAIN MENU appears on the TV.
2. Press % % % % % / fi fi fi fi fi to move
The SURROUND MODE menu appears.
3. Press % % % % % / fi fi fi fi fi to move
If you want to adjust the selected mode, go to the following steps.
4. Press MENU.
The MAIN MENU appears on the TV again.
5. Press % % % % % / fi fi fi fi fi to move
The adjustment menu for the mode you have selected in step 3 appears.
6. Press % % % % % / fi fi fi fi fi to move
On these adjustment menus, you can do the following:
For HALL:
"REAR":
"DELAY":
For Dolby Pro Logic:
"CENTER MODE":
"TEST":
"CENTER":
"REAR":
"DELAY":
"CENTER TONE":
For Dolby 3ch Logic:
"CENTER MODE":
"TEST":
"CENTER":
"CENTER TONE":
7. When you finish, press MENU EXIT.
The menu disappears from the TV.
(Also see pages 24)
to "SURROUND," then press @ @ @ @ @ / # # # # # .
to one of the surround modes.
to "SURROUND ADJUST," then press @ @ @ @ @ / # # # # # .
to the item you want to set or adjust, then press @ @ @ @ @ / # # # # # .
Adjust the rear speaker output level.
Adjust the delay time of the rear speaker sound.
Select the center mode.
Output a test tone.
Adjust the center speaker output level.
Adjust the rear speaker output level.
Adjust the delay time of the rear speaker sound.
Select the center tone.
Select the center mode.
Output a test tone.
Adjust the center speaker output level.
Select the center tone.
SURROUND MODE menu
HALL adjustment menu
PRO LOGIC adjustment menu
3CH LOGIC adjustment menu
Page 34