Section 3 − Definitions; Warning Label Definitions - Miller PRO 300 Owner's Manual

3-1. Warning Label Definitions

1
10
+ −
1
11
+ −
7
8
1
SECTION 3 − DEFINITIONS
2 3
4
3
2
+ −
9
1
2
S-176 106
2 3
4 5 6
1
4
+ −
3
+ −
S-176 108
12
4
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Do not smoke and keep
matches and flames away from
battery.
3 Sparks can cause battery
gases to explode. Battery
explosion can blind and injure.
Wear a face shield.
4 Battery acid can burn skin. Do
not spill acid.
5 Read Owner's Manual.
6 Wear rubber gloves.
7 Dead battery
8 Engine block
9 Fully charged battery
2
10 Do not connect last negative
cable to dead battery − connect
instead to engine block.
11 Jumper cables − observe
polarity and make connections
in numbered sequence shown.
12 Once dead battery is charged,
disconnect cables in sequence
shown.
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Moving parts, such as fans,
rotors, and belts, can cut
fingers and hands and cause
injury. Keep away from moving
parts.
1 Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2 Ether will damage engine. Do
not use ether as a starting aid.
3 Read Owner's Manual.
4 Use glow plugs for 10−25
seconds to aid starting in cold
weather.
OM-4422 Page 9
3/96
3/96
6/02