Section 8 − Maintenance & Troubleshooting; Routine Maintenance - Miller PRO 300 Owner's Manual

SECTION 8 − MAINTENANCE & TROUBLESHOOTING

8-1. Routine Maintenance

Note
Follow the storage procedure in the engine owner's manual if the unit will not be used for an
extended period.
Change Oil. See
Section 8-9.
OM-4422 Page 34
Every 8 h
Wipe
Up
Spills.
Every 50 h
Clean Air Filter.
See Section 8-4.
Every 100 h
Check air cleaner
hoses for cracks
and loose clamps.
Every 250 h
Replace
Unreadable
Labels.
Y Stop engine before maintaining.
.
Recycle engine
fluids.
*
Coolant
Full
OIL
Full
1/2 in.
(13 mm)
Change Oil Filter.
See Section 8-9.
See Engine Manual and Maintenance
Label for important start-up, service,
and storage information. Service unit
more often if used in severe conditions.
To be done by Factory Authorized
Service Agent.
Check Fluid
Levels. See
Section 5-6.
Clean And
Tighten
Weld
Terminals.
Clean And
Tighten
Battery
Connections.
Check Belt
Tension.
Check And
Clean Spark
Arrestor. See
Section 8-5.