Available Dsp Modes According To The Speaker Arrangement - JVC RX-6100VBK Instructions Manual

Available DSP Modes According to the Speaker Arrangement

Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 12).
Speaker arrangements
TV
Front
speaker
TV
Front
speaker
Center speaker
TV
Front
speaker
Rear
speaker
TV
Front
speaker
Center speaker
Rear
speaker
20
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
Front
speaker
• 3D THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• HEAD PHONE
• DSP OFF (DSP mode is canceled)
Notes:
• You can only select "HEAD PHONE" while playing a multi-sound source
encoded with Dolby Digital or DTS Digital Surround.
• You cannot select the Surround mode with this speaker setting.
Each time you press DSP MODE on the front panel or SURROUND MODE on
Front
the remote control, the DSP modes change as follows:
speaker
By pressing DSP MODE:
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• HEAD PHONE
• DSP OFF (DSP mode is canceled)
Front
To activate the Surround
speaker
mode, press SURROUND
button so that the lamp next to
the button lights up.
Rear
speaker
Front
speaker
Rear
speaker
Available DSP modes
By pressing SURROUND MODE:
• DOLBY/DTS SURROUND
(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• 3D ACTION
• HEAD PHONE
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, you can also use the
SURROUND button.