Av Compu Link Remote Control System - JVC RX-6100VBK Instructions Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1:
VCR
VHS
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
CONNECTIONS 2:
CASE1: If the DVD player is equipped with the S-video terminals
CASE2: If the DVD player is not equipped with the S-video terminals
DVD player
DVD
AV
COMPU LINK
AV
COMPU LINK
TV
To Video input 1
To Video input 2
DO NOT use this video terminal.
DVD player
DVD
VCR
S-VHS
TV
If the AV COMPU LINK terminal
on the TV is "RECEIVER/AMP"
RECEIVER/AMP
EX
(VCR)
If the AV COMPU LINK terminal
on the TV is "AV COMPU LINK
EX"
AV
COMPU LINK EX
DO NOT use this video terminal.
VIDEO
DVD
DBS
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
VIDEO
S-VIDEO
VIDEO
DVD
DBS
TV
OUT
(REC)
VCR
IN
(PLAY)
MONITOR
OUT
VIDEO
S-VIDEO To Video input 2
CAUTION
The AV COMPU LINK remote
control system cannot control the
DBS tuner connected to the TV
SOUND/DBS jacks.
AV
COMPU LINK
RECEIVER/
Notes:
AMP
• When connecting only the
VCR or DVD player to this
receiver, connect it directly to
the receiver using cable with
the monaural mini-plugs.
• Refer also to the manuals
supplied with your video
components.
DVD player
DVD
VCR
S-VHS
27