Sound is distorted Sound is noisy / ‘hissy’ Digital optical issues: ‘Clicking’ or no sound No sound from subwoofer (soundbar working) Battery replacement (remote) Orbitsound Warranty Warranty Terms Making a Warranty Claim Orbitsound Ltd Warranty Terms and Conditions Additional Safety Information Specifications...
Welcome Thank you for purchasing the orbitsound M9 compact spatial stereo soundbar with wireless subwoofer and Bluetooth. With proper use the orbitsound M9 delivers superb sound fidelity, engaging spatial stereo sound, and will provide you with a fantastic listening experience.
BLUE: On OFF: Power off IR receiver The orbitsound M9 soundbar produces most of the sound that you hear. It produces the main signal and spatial stereo information. Remote control The remote control provides volume control, tone control and sound source selection, and additionally playback controls when using a connected Bluetooth device.
Control panel overview The soundbar can be controlled from the control panel: Optical Bluetooth 1. Source: Press to cycle through the inputs. This controls what device is playing through the soundbar. 2. Bluetooth: Short press to renew a Bluetooth connection / start playback. Long press (Press and hold) to enter pairing mode.
A) Connect the Soundbar to your TV 1) Remove plastic covers from optical cable: IMPORTANT: Remove the protective plastic covers from a new TOSLINK (optical) cable before connecting to the optical sockets. Failure to remove these covers may result in damage and will interrupt the sound output. 2) Connect to your TV with the optical cable: TV CONNECTION PANEL HDMI...
Page 9
2) (OPTION) If your TV does not have an optical output: TV CONNECTION PANEL HDMI IN 1 AUDIO OUT HDMI AUDIO IN IN 2 AUDIO IN VIDEO IN Use the included RCA cable to connect the audio output from your TV to the soundbar.
The Bluetooth source light will flash quickly to show that pairing mode has started. Look on your device for ‘Orbitsound’ in the Bluetooth device list, and pair with it. When a device is paired, the soundbar Bluetooth source light will change to solid blue.
Remote control The control panel functions can also be done from the remote control: Source Changes the input source Volume + / - Controls volume Power Enter standby / resume Change tone: Bass and treble controls the sound: Treble- Treble+ Bass- Bass+ Treble adjust...
Advanced Setup & Use The orbitsound M9 is easy to set up and enjoy, but even better sound may be achieved by following these guidelines. Positioning - getting the most from spatial stereo The spatial stereo sound field is produced by the speakers in the sides of the soundbar.
Channel selection If you experience interference from a router, computer, or another soundbar operating on the same frequency, you can change the channel that the Orbitsound wireless system is running on. Note: Interference usually sounds like the bass is stopping and starting, and maybe a ‘popping’...
Other features Power saving The M9 features a low power state with wireless subwoofer low-power control. When the soundbar enters standby mode, the power consumption drops. It is recommended that Users routinely use standby mode as this also shuts down the...
Setting memory When in standby mode, or if disconnected from the mains completely, the soundbar will remember settings for pairing, bass, treble, volume and source selection. Note that the volume will be reduced if set very high when the unit restarts to protect the listener.
Maintenance Cleaning and care Use a soft, clean cloth moistened with plain, luke-warm water to clean the exterior of the unit. Glass cleaner is a good way to remove finger marks, but please use it sparingly, and avoid contact with the actual loudspeaker driver units. IMPORTANT: Never use solvents such as benzene or other strong chemical cleaners since these could damage the unit’s finish.
Adjust the volume of the soundbar until sound is heard. • Increase the volume of the playback device. The M9 features an energy saving mode that cuts the power to the amplifiers when there is no signal for a long time.
Check the output format of the optical signal from the playing device. Choose ‘normal’ or ‘PCM’ format. Refer to the TV manufacturer’s handbook for more information. You can also contact Orbitsound for advice, see contact help line in this handbook and on the packaging.
Orbitsound Warranty This Orbitsound product is supplied with a 24 month limited manufacturer’s warranty dated from new purchase date. This warranty covers repairs or replacement that may be required in the event of unit failure during normal use, subject to the terms and conditions stated below and at the Agent’s discretion.
God, explosion, fire, terrorism, accident, war or threats of war, prohibitions of any kind, embargoes, strikes or lockouts. GENERAL The Agent may assign or subcontract responsibilities and rights under this warranty. In all warranty cases, please refer to the support pages of www.orbitsound.com first.
Additional Safety Information 1 - The apparatus shall not be exposed FCC Statement: to dripping or splashing and that This equipment has been tested and found to comply objects filled with liquids, such as vases, with the limits for a Class B digital device, pursuant coffee mugs, glasses etc.
Stereo Line level -10dBu 3.5mm jack and RCA. TOSLINK optical digital input Bluetooth (wireless) Output(s) Orbitsound 2.4GHz audio Recommended placement Bar, in front of television Sub, floor, port facing wall Dimensions (H x W x D) [mm] 90 x 300 x 100mm (soundbar)